MKN Tilting Bratt Pan / Griddle 7EGPF040XF – Electric

One working zone and a 15-litre capacity define the MKN 7EGPF040XF as a compact electric tilting bratt pan module for tightly scoped galley tasks. That scale fits a line where a single, controlled position is needed rather than a bank of plates.

On board, that kind of clearly bounded capacity is useful wherever a repeatable operation has to run alongside a main cooking block without disturbing it. The 1-zone layout gives a single reference point for rotating crews: one surface, one setting, one job. It also keeps the electrical demand and heat shed tied directly to the small footprint of the module instead of spreading it across unused areas.

The 15-litre capacity is a planning number as much as a physical one. Any process assigned to this table has to sit inside that 15-litre envelope, so recipes and production schedules can be matched to what the equipment can actually hold. For small-batch components, mise-en-place or a dedicated holding point, that volume can be enough to decouple a critical step from the rest of the range. Where production is based on much larger vessels, the 15-litre limit is a clear signal that this unit should be specified as an auxiliary station, not as the primary cooking asset.

Thermostatic temperature control is the core functional feature of the 7EGPF040XF. With only one working area to manage, the control can be set to the required condition and left to hold it for that 1-zone surface, instead of constant manual intervention. In a marine galley where different watches may handle the same section, being able to dial in a setting and expect the same behaviour from service to service reduces dependence on individual operator judgement.

The IP-rated water protection allows this electric tilting bratt pan to sit directly in wet-cleaned areas of the galley. Cleaning regimes on ships typically rely on generous water use, and IP protection means the internal electrical components and control elements are shielded to a defined level against splashes and spray. That protection is what lets the module be included in the same wash-down pattern as the surrounding furniture without segregating it behind low-splash barriers or special procedures.

Build and control

• Thermostatic temperature control
• IP-rated water protection

This tilting bratt pan is the right choice where a designer needs a small, clearly defined electric zone with a 15-litre capacity built into a larger MKN line-up, for example as a dedicated station for a specific preparation or holding duty. It is the wrong choice where the galley concept relies on multiple independent heating points or batch sizes that routinely exceed 15 litres, because the single working area and fixed capacity place a hard ceiling on throughput and flexibility. Ordered under MKN product number 7EGPF040XF.