Electrolux Professional marine galley and laundry equipment

Electrolux Professional runs a separate marine programme alongside its shore catalogue. The
appliances are not shore units with a different label: they are ordered in the vessel's own supply
voltage and frequency, built with marine feet and fixings, and specified so that a galley can be
cleaned the way a galley at sea actually gets cleaned.

Made-to-measure cooking blocks

The marine cooking line comes in two depths — 900 mm and 850 mm — carrying the same technology in
two footprints, so a block can be sized to the deck plan instead of the plan being sized to the
block. Functions from both depths can be combined into a single welded block, and the blocks will
sit on third-party bases where a refit requires it. The whole range is engineered to USPHS
requirements, which is what a passenger vessel calling at US ports has to satisfy.

How the range is cleaned down

Ingress protection is not one figure across the range: of the 238 marine units we list, 52 are
rated IPX6, 109 IPX5 and 17 IP25. IPX6 takes a pressure spray gun; the IPX5 and IP25 bodies
take a hose or a wipe-down and should not be jetted. Checking the rating before the wash-down regime is written matters, because
the surfaces that cannot be reached are the ones that fail an inspection.

What we list

Our catalogue carries the marine range across cooking, warewashing, refrigeration and preparation:
thermaline 90 modular blocks, 900XP and 700XP cooking lines, SkyLine combi ovens in Premium,
PremiumS, Pro and ProS specifications, ProThermetic tilting boiling and braising pans from 60 to
300 litres, green&clean rack-type, hood-type and undercounter dishwashers, and ecostore, Prostore
and Digital Cabinets refrigeration. Each product page carries the Electrolux Professional product
number (PNC) and, where published, the model code, together with the full technical table and the
product datasheet.

Ordering

Every unit is quoted to the vessel: supply voltage and frequency, heating type, handing and
installation arrangement are all specified at order. Send us the PNC or the specification and we
will quote against it.