Miele Tumble Dryer PDR 908 HP [MAR 2 AC 208-240V 60Hz] – 8 kg, 208–240 V, Stainless steel
Miele Little Giants PDR 908 HP MAR heat‑pump dryer, 8 kg, 2~ 208–240 V 60 Hz, 1.2 kW, Lloyd’s Register approved for shipboard use.
8 kg · 1.2 kW
Marine equipment type
Marine Heat Pump Tumble Dryers
6 marine heat pump tumble dryers from Miele, with published technical data and supply voltages for shipboard installation.
6 marine heat pump tumble dryers
Miele Tumble Dryer PDR 908 HP [MAR 1N AC 230V 60Hz] – 8 kg, 230 V, Stainless steel
8 kg Little Giants marine heat‑pump dryer, 1.2 kW at 230V~ 60HZ with 130 l drum and Lloyd’s Register approval. PDR 908 HP [MAR].
8 kg · 1.2 kW
Miele Tumble Dryer PDR 908 HP [MAR 1N AC 230V 60Hz] – 8 kg, 230 V, Lotus white
Miele Little Giants PDR 908 HP MAR heat‑pump dryer, 8 kg with 130 l drum, 1.2 kW at 230V~ 60HZ, Lloyd’s Register approved for shipboard use.
8 kg · 1.2 kW
Miele Tumble Dryer PDR 908 HP [MAR 1N AC 230V 50Hz] – 8 kg, 230 V, Stainless steel
8 kg Little Giants heat‑pump dryer, 130 l drum, 1.44 kW at 230V~ 50HZ with Lloyd’s Register approval.
8 kg · 1.44 kW
Miele Tumble Dryer PDR 908 HP [MAR 1N AC 230V 50Hz] – 8 kg, 230 V, Lotus white
8 kg Little Giants heat-pump dryer, 1.44 kW at 230V~ 50HZ with 130 l drum and ≤70 dB(A) emission. PDR 908 HP [MAR 1N AC 230V 50Hz].
8 kg · 1.44 kW
Miele Tumble Dryer PDR 507 HP [MAR] – 7 kg, 230V~ 60HZ, Lotus white
7 kg Little Giants marine heat-pump dryer, PDR 507 HP [MAR], 230V~ 60HZ, 1.2 kW connected load, Lloyd's Register approved.
7 kg · 1.2 kW
About marine heat pump tumble dryers
A heat-pump dryer recirculates its air and needs no exhaust duct, only a condensate drain, so there is no penetration through the hull or fire zones. The trade-off is cycle time: on the Miele PDR 908 a cottons cycle takes about 79 minutes with a heat pump against 42 minutes vented.
What this selection includes
This page lists 6 products from Miele (6). By series: Little Giants (6). Across the list you will find rated power from 1.2 kW to 1.4 kW and load sizes up to 8 kg.
By vessel type, the selection lists 6 for ships, 6 for yachts, 6 for boats and 6 for offshore units.
Models on this page include Miele Tumble Dryer PDR 507 HP (7 kg, 1.2 kW) and Miele Tumble Dryer PDR 908 HP (8 kg, 1.44 kW).
Specifying marine heat pump tumble dryers
- Supply: the products here are listed in 230 V or 240 V builds, 4 of them with 60 Hz operation, so confirm the voltage, phase and frequency of the board before choosing a model.
- Power: rated from 1.2 kW to 1.4 kW across this list, to be added to the rest of the laundry load.
- Dryer type: a vented dryer needs a DN 100 exhaust duct, a heat-pump dryer only a condensate drain.
See the marine tumble dryers category for the wider range and the guide to choosing galley equipment.
Questions about marine heat pump tumble dryers
What are marine heat pump tumble dryers used for?
A heat-pump dryer recirculates its air and needs no exhaust duct, only a condensate drain, so there is no penetration through the hull or fire zones.
Which supply voltages are available?
Across this selection the listed voltages are 230 V and 240 V, and 4 products list 60 Hz operation. Each unit is ordered in the vessel's own supply voltage and frequency.
How do I get a quotation?
Add the products to your quote list or send the vessel type, supply voltage and frequency and the quantities through the quote form. Prices are quoted to the vessel, not listed online.
Request a quotation for marine heat pump tumble dryers
Send the vessel type, supply voltage and frequency and the quantities, and our team will come back with a specification and quotation.