Electrolux Professional Boiling Top Range 371146 – 900XP, 700XP 2- Hot Plates El. Boiling Top

Two Ø 230 mm hot plates, each rated 2.6 kW, set the 371146 up as a compact 5.2 kW boiling top module. At 400 mm wide and 730 mm deep in the 900XP family, it drops into a line where a narrow electric boiling position is needed without giving up full-size plate diameter.

On a vessel, a 400 mm module makes planning around bulkheads and service runs simpler than a full-width range body. The 250 mm top height matches other 900XP elements, so this boiling top can sit in a continuous run without steps that trap soil. Supply is 400 V/3 ph/50/60 Hz, which aligns with standard three-phase galley distribution; there is no need for a dedicated special supply on the panel schedule.

Both the front and back plates are specified at 2.6–0 kW, so each plate can be driven anywhere from its maximum down to zero rather than on a simple two-position switch. That matters when a single module is expected to hold a sauce on the rear plate while bringing a smaller pan to the boil on the front one. The matching Ø 230 mm dimensions on both plates mean any pan that suits the front position behaves the same way on the back.

The body footprint of 400 x 730 x 250 mm and a net weight of 20 kg keep this unit manageable for installation on existing bases or counter structures. In a refit, that combination allows the boiling top to be added without reinforcing light cabinetry beyond what the 900XP line already assumes. The N7CE1 certification group code sits in the technical file for engineers standardising equipment types across the fleet.

Scotch-Brite finished exterior panels are easier to keep presentable in a working galley than mirror-polished sheet, hiding incidental scuffing while still meeting the smoothness needed for cleaning. Flush-fitting side edges allow units to be installed without gaps between adjacent 900XP bodies, which reduces the number of exposed seams the crew has to keep on top of and removes food traps between modules.

Build and control

• IPX4 rated against water ingress
• Scotch-Brite finished exterior panels
• Flush-fitting side edges for gap-free installation

This boiling top suits galleys that need a small, clearly defined boiling station in a 400 mm bay, or that are extending an existing 900XP line with extra plate capacity. It is not the right choice where a single appliance is expected to provide frying, grilling and boiling functions in one footprint; in that case a broader combination unit from the same family should be considered. Ordered under Electrolux Professional product number 371146.