MKN Induction Cooking Table 1223103 – 4 Zone, CounterSL
CounterSL induction cooking table 1223103, 800 x 700 x 270 mm with 14 kW at 400 V and a 700 x 540 mm glass-ceramic work surface.
400 mm wide 900XP electric boiling top with two 4 kW hot plates, 930 mm depth and IPX5 protection, for 400 V/3 ph/50/60 Hz installations.
| Manufacturer | Electrolux Professional |
|---|---|
| Product number (PNC) | 391180 |
| Model code | E9ECMD2Q05 |
| Series | 900XP |
| Product type | Boiling Top Range |
Two hot plates at 4 kW each give the 391180 an installed load of 8 kW in a compact 400 mm wide body. At 930 mm deep and only 250 mm high, it is a low-profile electric boiling top built to sit in a 900XP line without consuming the space of a full range.
On a ship this footprint and height matter more than in a shore kitchen. A 930 mm depth matches the marine XP cooking line, so the unit can be aligned with adjacent modules and ventilated under a common canopy. At 250 mm high it leaves room below for an open base, refrigeration, cupboards or simply a clear deck, depending on how the galley is laid out. The 30 kg net weight keeps handling straightforward during installation, but once fixed it becomes part of the run rather than a movable counter-top appliance.
Electrically, the boiling top is specified for a 400 V/3 ph/50/60 Hz supply. That allows it to be used on vessels built to a 400 V system as well as in shore-based test kitchens without needing a separate variant. The 8 kW electrical power maximum should be part of the load calculation at the galley distribution board; grouped with other 900XP appliances the diversity factor needs to be considered early, as these are resistive loads that will often run near their rating in service.
Construction is in AISI 304 (1.4301) stainless steel, with Scotch-Brite finished exterior panels that visually match the rest of the 900XP series. The waterproof index is IPX5, so the top and controls are built to withstand low-pressure water jets rather than just splashing, which aligns with common wash‑down practices in professional galleys. Flush-fitting side edges are designed for gap-free installation against neighbouring 900XP units, reducing the soil traps that drive cleaning time and inspection findings.
Build and control
• AISI 304 (1.4301) stainless steel construction
• Scotch-Brite finished exterior panels
• Flush-fitting side edges for gap-free installation
• IPX5 waterproof index for water-jet cleaning
This boiling top is a good fit where a line needs two strong electric plates in a narrow 400 mm module, for example as a support station on a larger pass or as a dedicated pan position near a service area. It is not the right choice where multiple pans must be held at once or where the requirement is for a full cooking suite with ovens and fryers in a single body; in those cases the wider or freestanding units in the same 900XP family should be evaluated instead.
Ordered under Electrolux Professional product number 391180.
| Manufacturer | Electrolux Professional |
|---|---|
| Product number (PNC) | 391180 |
| Model code | E9ECMD2Q05 |
| Series | 900XP |
| Product type | Boiling Top Range |
| Supply voltage | 400 V/3 ph/50/60 Hz |
| Electrical power max. | 8 kW |
| External dimensions, Width | 400 mm |
| External dimensions, Depth | 930 mm |
| External dimensions, Height | 250 mm |
| Net weight | 30 kg |
| Certification group | N9CE1 |
| Waterproof index | IPX5 |
The 391180 is rated for a 400 V/3 ph/50/60 Hz supply, with a maximum electrical power draw of 8 kW.
External dimensions are 400 mm in width, 930 mm in depth and 250 mm in height. The net weight is 30 kg.
The unit is constructed in AISI 304 (1.4301) stainless steel with Scotch-Brite finished exterior panels, and carries an IPX5 waterproof index.
Electrolux Professional Marine Solutions — commercial galley and laundry equipment built to marine specification for merchant ships, passenger vessels, offshore platforms and yachts. Configured to order — tell us the vessel and the supply voltage and frequency, and we will quote the correct build.
All Electrolux Professional equipmentCounterSL induction cooking table 1223103, 800 x 700 x 270 mm with 14 kW at 400 V and a 700 x 540 mm glass-ceramic work surface.
60-litre round electric boiling kettle with VAPRO steam generator, 16 kW at 400 V in an 800 x 700 mm Optima 700 body. Article 2122802C.
4-zone 20 kW induction top, 1000 x 900 mm, one-side operated thermaline 90 module, 440 V/3 ph/60 Hz, IPX6 washdown-ready.
iVario Pro L multifunctional cooking system in MarineLine marine version: 100 litres, 100–300 meals a day, 27 kW. Boils, fries and deep-fries; DNV GL certified.
Add it to your quote basket with anything else you need, or request a quotation for this item alone.
Electrolux Professional Boiling Top Range 391180 – 900XP, 2-hot plate (4 kW each) electric boiling top