Electrolux Professional Grill Top 371304 – 900XP, 700XP Electric Grill Top HP 12000mm

A cooking surface of 1065 mm by 400 mm on a unit that is only 800 mm wide gives the 371304 a footprint-to-grill-area ratio that stands out in the 900XP line. The plate projects beyond the nominal module width, so the operator gains working width without needing more bay space in the suite.

With external dimensions of 800 mm width, 730 mm depth and 250 mm height, this grill top is dimensioned to drop into a 900XP or 700XP run while maintaining a level worktop. That consistency simplifies ventilation hood design and keeps gaps to a minimum along the line, an important point where hygiene plans demand continuous, cleanable surfaces around hot equipment.

Supply is 400 V/3 ph/50/60 Hz, aligned with the standard XP electrical platform. For a project where the kitchen or galley distribution is already planned around that supply, this unit can be scheduled without revisiting transformer capacity or protective device selection. Designers working to a consolidated XP platform can treat this grill top as another 400 V load on the same board.

The 1065 mm cooking surface width on an 800 mm chassis lets the chef portion the plate into distinct zones while still keeping the appliance compact. A 400 mm front-to-back cooking surface depth gives a straightforward, linear grill area that is easy to ventilate and to service from the front edge. At a net weight of 56 kg, the unit has enough mass to sit solidly on a suitable base or cupboard without requiring special structural reinforcement, yet can still be handled during installation with standard kitchen equipment rigging.

The 730 mm depth fits the 900XP geometry so that the front and rear lines stay consistent across a battery of units. That reduces the risk of exposed edges or overhangs that become dirt traps or snag points for staff and trolleys. It also simplifies fabrication of any custom infill pieces or rear service ducts, because the grill’s body follows the same depth line as its neighbours.

Build and control

• Scotch-Brite finished exterior panels
• Flush-fitting side edges for gap-free installation
• Stainless steel splash guards

Scotch-Brite finished exterior panels give a uniform appearance across the 900XP line and help hide day-to-day cleaning marks, which matters where the cooking suite is visible to crew or passengers. Flush-fitting side edges allow adjacent units to be butted with minimal jointing, reducing the amount of on-site sealing and helping to keep soil out of the interfaces between modules. Stainless steel splash guards around the cooking surface keep grease and debris on the plate rather than on surrounding worktops or adjacent appliances, shortening clean-downs and limiting cross-contamination.

This grill top is a good fit where an 800 mm bay is already allocated in a 900XP or 700XP line and the brief calls for more grilling width than a standard plate normally offers. It is the wrong choice where space is so constrained that no projection beyond the nominal chassis width can be tolerated, or where the project is tied to a different electrical standard than 400 V/3 ph/50/60 Hz.

Ordered under Electrolux Professional product number 371304.