Professional Galley Equipment for Marine & Aviation

Electrolux Professional Neutral Base Unit 371264 – 900XP, 700XP Open Base Cupboard 1 Module with flanged feet

800 x 550 x 600 mm 900XP neutral open base cupboard with 800 x 550 x 450 mm cavity. PNC 371264.

ManufacturerElectrolux Professional
Product number (PNC)371264
Model codeE7BAMH00O00
Series900XP
Product typeNeutral Base Unit

Electrolux Professional Neutral Base Unit 371264 Overview

An 800 mm wide footprint and 550 mm depth make the 371264 a single-module neutral base that still carries a full-width cupboard cavity. The 600 mm external height delivers 550 mm of internal cupboard height, so the storage volume stays usable across the whole 800 x 550 mm plan.

On a shipboard galley run, that 550 mm external depth is a planning figure as much as a dimension. It keeps the base shallower than the main cookline in front, which helps where traffic aisles are tight or the base backs onto a bulkhead with services behind. A cupboard cavity of 800 mm width, 550 mm height and 450 mm depth gives close-at-hand space for light kit or consumables without pushing the line further into the walkway.

The external structure measures 800 x 550 x 600 mm with a net weight of 15 kg, so the unit can be brought aboard and positioned without special handling before it is fixed in place. That 15 kg mass means the base is easy to shift during layout changes or fit-out, yet once the flanged feet are secured to the deck or plinth it becomes part of the continuous 900XP/700XP galley line. The cupboard cavity mirrors the full 800 mm module width, avoiding the dead side strips that often appear with narrower bases under wider tops.

Internally, a 450 mm cupboard depth leaves deliberate space at the rear for pipework, drains or cable runs when the base is installed against a services bulkhead. The 550 mm internal height inside a 600 mm body height leaves room for the load-bearing top frame while still allowing vertical stacking of smaller items or a simple shelf arrangement if required. As a neutral base unit, it is specified to sit under compatible 900XP or 700XP tops of the same 800 mm width, so the footprint stays consistent even if the appliance mix above it changes during the vessel’s life.

Build and control

• Scotch-Brite finished exterior panels
• Adjustable feet

This base unit suits a galley where an 800 mm wide 900XP or 700XP module is already defined and the requirement is open cupboard storage in a 550 mm deep body with a 600 mm overall height. It is the wrong choice where enclosed storage with doors is mandatory, where a deeper body is needed to match adjacent equipment, or where the base must support heavy bulk stock that should be carried in a different style of understructure. Ordered under Electrolux Professional product number 371264.

Key features of the 371264

  • Scotch-Brite finished exterior panels
  • Adjustable feet

371264 technical specifications

ManufacturerElectrolux Professional
Product number (PNC)371264
Model codeE7BAMH00O00
Series900XP
Product typeNeutral Base Unit
External dimensions, Width800 mm
External dimensions, Depth550 mm
External dimensions, Height600 mm
Cupboard Cavity Dimensions (width)800 mm
Cupboard Cavity Dimensions (height)550 mm
Cupboard Cavity Dimensions (depth)450 mm
Net weight15 kg

Also listed under

Questions about the 371264

What are the external dimensions of the 371264 base unit?

The 371264 neutral base unit measures 800 mm in width, 550 mm in depth and 600 mm in height.

How large is the cupboard cavity in the 371264?

The cupboard cavity is 800 mm wide, 550 mm high and 450 mm deep, matching the full module width in an open-base format.

What is the net weight of the 371264?

The 371264 neutral base unit has a net weight of 15 kg, which simplifies handling during installation before the feet are fixed.

Where the 371264 is used

Marine Galley Equipment Ship Galley Equipment Yacht Galley Equipment Commercial Vessel Galley Equipment Offshore Galley Equipment

Electrolux Professional, manufacturer of the 371264

Electrolux Professional Marine Solutions — commercial galley and laundry equipment built to marine specification for merchant ships, passenger vessels, offshore platforms and yachts. Configured to order — tell us the vessel and the supply voltage and frequency, and we will quote the correct build.

All Electrolux Professional equipment

Downloads for the 371264

Technical datasheet (PDF)

Similar Neutral Base Units

Get pricing for the Electrolux Professional Neutral Base Unit 371264 – 900XP, 700XP Open Base Cupboard 1 Module with flanged feet

Add it to your quote basket with anything else you need, or request a quotation for this item alone.

Request a Quote