Electrolux Professional Neutral Base Unit 589806 – thermaline 90, 600 mm Open base, GN conform, 1 Side (H3) - H=450

Six hundred millimetres of width and a 450 mm body height define the footprint of the thermaline 90 neutral base unit 589806. With a depth of 900 mm and an open H3 cavity, it sits as a GN-conform neutral support under matching thermaline 90 tops while leaving the space beneath accessible rather than closed.

On a ship this combination of 600 × 900 mm plan area and 450 mm height matters when aligning the cooking suite with coamings, bulkheads and extraction. The base keeps the geometry of the line consistent so the top equipment above it can be specified and installed without introducing step changes in depth or unexpected voids. An open base also keeps the deck beneath visible and reachable during washdown, which simplifies cleaning routines in inspection-driven galleys.

The usable cavity offers 340 mm of width, 330 mm of height and 740 mm of depth. Those figures give the designer the real storage envelope available for GN-conform use under the neutral top, and they show that this unit is about organised container parking rather than bulk pot storage. Net weight is 20 kg, so it is straightforward to position during installation and then tie into the surrounding thermaline 90 block once the foundation and connections are in.

Externally, the 600 × 900 × 450 mm dimensions align this base precisely with other 900 mm-deep thermaline 90 modules, which is relevant when building up a longer line: the base does not change the front run or push any top equipment off the extraction or service zones planned above. For refits, knowing that the depth is 900 mm and the height 450 mm lets the superintendent check that the base and top combination will clear existing structures without having to adjust surrounding furniture.

Build and control

• IPX5 rated against water ingress
• AISI 304 (1.4301) stainless steel construction
• Stainless steel internal frame
• Rounded internal corners for cleaning
• Front access to components for service

The AISI 304 (1.4301) stainless construction, combined with a stainless steel internal frame, gives this neutral base the same material behaviour as the thermaline 90 tops it supports, which matters where the environment exposes all surfaces to the same cleaning regime. IPX5 means the exterior can be washed with water jets instead of being limited to light wiping, and rounded internal corners reduce soil traps inside the cavity, cutting the time required to keep the open space clean. Front access to components keeps service on the line side, avoiding the need to disturb adjacent modules when something inside the base needs attention.

This is the right choice where a 600 mm module is needed under a thermaline 90 top and the brief calls for an open, GN-conform H3 base rather than enclosed storage. It is the wrong choice where the space under the top is expected to deliver heated holding, refrigerated storage or any powered function, because the 589806 is a neutral frame only and carries no active components for temperature control.

Ordered under Electrolux Professional product number (PNC) 589806.