Electrolux Professional Neutral Base Unit 589903 – thermaline 90, 500 mm Cupboard base with 1 door, GN conform, 1 Side (H2) - H=450

Five hundred millimetres of modular width and a height of 450 mm set the 589903 apart as a compact GN-conform cupboard base in the thermaline 90 line. With a net weight of 23 kg and a one-door H2 configuration, it is sized to sit under a 900 mm deep top without taking more deck than it needs.

On a shipboard galley, that 900 mm depth matters because it matches the thermaline 90 cooking modules, so the front aligns and the run stays continuous. The base is one-side operated, so it suits against-wall installations where access is only needed from the working aisle. At 450 mm body height it works as a base under a top unit rather than a freestanding legged cabinet, which helps where deckhead clearance and vertical stacking of equipment are tight.

Internally, the cupboard cavity gives 340 mm of width, 330 mm of height and 715 mm of depth. That geometry is GN-conform rather than a general-purpose void, so pans and containers sit in a predictable pattern instead of wasting space. The cavity depth makes use of the full 900 mm body while keeping the back clear for services. Rounded internal corners make washdown straightforward, which is important when cleaning is done with hoses rather than cloths.

Construction is in AISI 304 (1.4301) stainless steel with a stainless steel internal frame, so the base ties mechanically into the rest of the thermaline 90 chassis. Built to DIN 18860-2 with a drop-nose worktop profile, it shares the 900 mm modular depth and front profile of the cooking tops above. THERMODUL jointing between adjacent modules provides a waterproof, flush interface, so the cupboard base can sit in a seamless run with fryers, solid tops or other neutral sections without soil traps at the junctions.

Build and control

• IPX5 rated against water ingress
• AISI 304 (1.4301) stainless steel construction
• Built to DIN 18860-2 with drop-nose worktop
• THERMODUL jointing for a seamless run of units
• Stainless steel internal frame
• Rounded internal corners for cleaning
• Front access to components for service

Front access to components is significant in a marine galley where units are normally fixed to the deck or a plinth. Service from the working side reduces the need to unbolt or shift the line for maintenance. The 23 kg net weight is low enough for handling during installation but, once fixed down, the unit becomes part of a stable cooking block.

This base is the right choice when a 500 mm wide, 900 mm deep GN-conform cupboard is needed under a thermaline 90 top, with one-side access and H2 hygiene construction. It is not the right fit where through-service on both sides or taller freestanding storage is required; those layouts call for different bodies in the same series.

Ordered under Electrolux Professional product number 589903.