Electrolux Professional Neutral Base Unit 589905 – thermaline 90, 1000 mm Cupboard base with 2 doors, GN conform, 1 Side (H2) - H=450

A 680 mm wide cupboard cavity under a 1000 mm body gives the 589905 room for GN containers without wasting deck length. At 450 mm high and 900 mm deep, it is dimensioned as a neutral base under thermaline 90 tops rather than as a freestanding work cabinet.

On a marine line-up, those numbers matter because this unit fixes both the working height and the storage pattern below the hob, grill or boiling pan it carries. The 900 mm depth matches the thermaline 90 footprint, so the run stays flush to the bulkhead and to adjacent modules. At 450 mm body height the galley designer can work with the standard top modules to hit the specified working level without resorting to custom plinths.

The external dimensions are 1000 x 900 x 450 mm, with a net weight of 32 kg. Inside, the cupboard cavity measures 680 mm in width, 715 mm in depth and 330 mm in height. That internal envelope is where GN conformity counts: the clear width and depth are set up to take GN containers rather than loose pots, so provision can move in standard pans from prep to service and back into storage. The 330 mm cavity height reflects that role; it is a low undercounter store, not a tall pantry cupboard.

Construction follows the thermaline 90 pattern. The unit is built in AISI 304 (1.4301) stainless steel on a stainless steel internal frame, with rounded internal corners to shorten cleaning times and remove soil traps. Being built to DIN 18860-2 with a drop-nose worktop profile means it interfaces cleanly with adjacent tables and bases built to the same standard, and the recessed plinth line that DIN geometry implies keeps toe space and deck cleaning access consistent along the block. IPX5 rating against water ingress allows regular wash-down with spray in line with marine galley practice, instead of restricting cleaning to manual wiping.

Service has been thought through at the design stage. Front access to components means the unit can stay fixed to its foundation or plinth when maintenance is carried out, avoiding the need to break deck seals or disturb adjacent equipment. In a tightly planned galley where equipment is often welded to pads or set on a continuous plinth, that access pattern can decide whether a neutral base complicates or simplifies the whole installation.

Build and control

• IPX5 rated against water ingress
• AISI 304 (1.4301) stainless steel construction
• Built to DIN 18860-2 with drop-nose worktop
• THERMODUL jointing for a seamless run of units
• Stainless steel internal frame
• Rounded internal corners for cleaning
• Front access to components for service

This 1000 mm, 1-side operated GN cupboard base suits medium to large cooking blocks where thermaline 90 tops are specified and GN containers are the primary storage format under the line. It is the wrong unit where the requirement is tall storage volume or where no thermaline 90 modules are planned, because its 450 mm height and THERMODUL jointing are tuned to that system. Ordered under Electrolux Professional product number 589905.