MKN Combi Steamer DKECOD615-121G2 – Oven, Electric, FlexiCombi

Six GN 1/1 insertion levels, room for ten GN 2/1, and a quoted output up to 450 meals per day set the DKECOD615-121G2 apart as a high-volume FlexiCombi in a single upright body. At 997 x 799 x 1900 mm and 282 kg it brings full-size capacity into a footprint a ship’s galley can usually reserve without rebuilding the line.

On board, the combination of capacity figures and electrical rating is what decides whether this oven fits the space and the switchboard. The unit is rated for 30 to 380 meals per day in GN 1/1 mode and 30 to 450 meals per day when planned around the FlexiRack loading pattern, so it can cover anything from a small crew mess to a mid-size passenger service. The supply requirement is 400 V, with electrical power listed as 10.4 + 30.5, which needs to be allowed for in the galley’s load schedule and HVAC design because that input will be shed as heat into the room or the extract.

The chamber geometry is what underpins those meal numbers. In standard GN terms the oven carries 6 x GN 1/1 or 10 x GN 2/1; a separate line in the data gives FlexiRack capacity as 6 + 10 (16), allowing crosswise loading on dedicated racks. That flexibility lets a designer choose between conventional gastronorm trolleys and dedicated FlexiRack logistics, which is where the higher 450 meals per day planning figure comes from. Maximum load weight is stated as 54 + 120, so loading plans and racking should respect those limits when the oven is used in FlexiRack operation or mixed GN formats.

Installed size at 997 x 799 x 1900 mm means the unit sits in the same width band as other full-size combis, but its height calls for a check against deckhead clearance and any overhead ductwork or fire suppression equipment. The 282 kg net weight matters where the oven is to be installed on a raised deck, mezzanine or lightweight structure and needs to be checked against the naval architect’s published floor loading for the space. In service, the combination of 6 GN 1/1 and 10 GN 2/1 support gives a broad menu range from bulk roasting and steaming to mixed tray regeneration.

Build and control

• FlexiCombi series configuration
• GN 1/1 capacity: 6 levels
• GN 2/1 capacity: 10 levels
• FlexiRack capacity: 6 + 10 (16)
• Net weight 282 kg
• Maximum load weight 54 + 120
• Dimensions (L x W x H) 997 x 799 x 1900 mm
• Electrical connection 400 V
• Electrical power rating 10.4 + 30.5
• Planned output 30–380 meals/day (GN 1/1)
• Planned output 30–450 meals/day (FlexiRack)

This configuration is a good fit where one combi has to carry most of the production, because the 6 x GN 1/1 and 10 x GN 2/1 capacities plus FlexiRack operation give a wide operating window. It is less suitable in a very constrained galley where height is limited or where the 400 V, 10.4 + 30.5 electrical rating would exceed the available breaker size; in those cases a smaller or lower-powered combi should be considered. Ordered under MKN article number DKECOD615-121G2.