MKN Combi Steamer DKECOD621-621G2 – Oven, Electric, FlexiCombi

2 x 20.9 kW connected load and a rated 72 + 72 kg maximum load weight define the DKECOD621-621G2 as a production combi block. Both figures sit inside a single 997 x 799 x 1700 mm cabinet, so the unit delivers two electric FlexiCombi chambers on one footprint.

In a ship’s galley that footprint matters as much as the power. A length of 997 mm and width of 799 mm lets the oven occupy one standard bay in an Optima-style cooking line while providing independent cooking in both cavities. The 1700 mm overall height keeps loading and unloading within a workable reach envelope on a moving deck, and the 248 kg net weight needs to be carried into the deck loading and lifting plan rather than treated as a light appliance.

The meals-per-day band of 60 to 320 is the planning guide for catering duty. At the lower end, one chamber can comfortably cover a smaller crew or officer’s mess while the second chamber is reserved for mise en place or regeneration. At the upper end, both ovens can be scheduled across breakfast, lunch and dinner to handle a main galley service within the specified 320-meal figure. The 72 + 72 kg maximum load weight supports heavier roasting or tray regeneration across both cavities without stepping outside the manufacturer’s loading limits.

Electrically, the combi steamer is specified at 400 V with a total connected power of 2 x 20.9 kW. That level of draw will generally sit alongside other large consumers such as boiling kettles and dishwashers, so the electrical engineer needs this figure early when laying out the switchboard and any load-management scheme. On vessels where available capacity is stretched, it is common to prioritise one chamber for peak service and schedule the second for off-peak work such as overnight slow cooking or low-temperature holding.

From a space and HVAC perspective, concentrating 2 x 20.9 kW into a 997 x 799 mm footprint simplifies extraction routing and deck planning because the thermal and moisture load is localised above one cabinet. It also means the air-conditioning and make-up air provision around that position must assume that both chambers can be at full output simultaneously during service.

Build and control

• Twin FlexiCombi configuration in a single 997 x 799 x 1700 mm body
• Electrical power rating 2 x 20.9 kW at 400 V
• Maximum load weight 72 + 72 kg across the two chambers
• Rated output of 60 – 320 meals per day for capacity planning
• Net unit weight 248 kg for structural and handling calculations

This oven is the right choice where two independent cooking regimes are needed continuously in the same galley bay, or where a single position under the hood has to carry both production and regeneration. It is the wrong choice for a small pantry or satellite galley that never needs more than one chamber at a time, because the 2 x 20.9 kW electrical load and 248 kg structure then exceed the real requirement and a single-chamber combi from the same series makes better use of both power and space. Ordered under MKN article number DKECOD621-621G2.