MKN Combi Steamer FKECOD615TG2 – Oven, Electric, FlexiCombi

Six GN 1/1 levels carrying up to 54 kg in a 997 x 799 x 790 mm body define the FKECOD615TG2’s role in a galley. It is a compact FlexiCombi that still covers 30–80 meals per day in GN 1/1 use, or up to 150 with FlexiRack.

On board, that footprint-to-output ratio is what matters. At 997 mm length and 799 mm width the oven fits into tighter cooking lines, while the 790 mm height keeps the top loading level accessible without climbing. With a net weight of 120 kg it is substantial enough to be securely fixed to a marine foundation without dominating a small galley bay.

The electrical data is straightforward: 10.4 kW connected load on a 400 V supply. That puts it in a range where a single deck or pantry distribution board can usually support it without a redesign, yet it still has the power density to handle its quoted 30–80 meals per day on GN 1/1 trays. Where FlexiRack is used, 6 FlexiRack positions correspond to approximately 10 GN 1/1 loads, allowing the same chamber to support up to 150 meals per day.

Capacity planning is helped by the published load figures. At 6 x GN 1/1, the chamber can be scheduled around standard container sizes, and the 54 kg maximum load weight sets a hard limit for menu planning that involves heavy roasts or dense product. For lighter plated work, running to the FlexiRack system expands the effective GN 1/1 count without changing the outer dimensions, which is useful where the galley has no scope to grow laterally.

IP-rated water protection is part of the specification. In a shipboard kitchen where cleaning relies on hose-down routines rather than light wipe-down, the ingress protection rating is not an abstract electrical figure but a condition for being able to wash the area down without protecting the oven every time. That reduces manual guarding and plastic sheeting in daily cleaning routines.

Build and control

• IP-rated water protection

This FlexiCombi size suits vessels where 30–80 meals per day need to be covered from a single combi chamber on GN 1/1 trays, or up to 150 meals per day where the operation is organised around FlexiRack. It is not the right choice for a main galley that has to carry significantly higher covers in peak service from one oven position; those spaces should be looking at larger bodies in the same line. Where deck area is constrained and a single 10.4 kW, 400 V connection is available, it gives a workable balance of power, volume and load.

Ordered under MKN product number FKECOD615TG2.