MKN Cooking Module 7EHEI042DP5 – Electric, Induction

Seven hundred watts of sensible heat and 280 W of latent heat are the headline figures for the MKN 7EHEI042DP5 induction cooking module. Those numbers define the load this unit places on a galley’s ventilation and air-conditioning, which is often the limiting factor when specifying cooking equipment on board.

On a vessel, HVAC capacity and duct routes are fixed long before galley fit-out, so knowing that this module sheds 700 W as sensible heat and 280 W as latent helps the designer balance the cooking line against the air-handling plant. In a compact or enclosed galley, a lower heat signature at the equipment front often matters as much as electrical loading, because excess sensible heat becomes a crew comfort and energy issue, while latent moisture can condense on cooler bulkheads and deckheads if not accounted for. The defined heat emission figures allow a naval architect or consulting engineer to incorporate this module into their load calculations with confidence.

As an electric induction unit, the 7EHEI042DP5 is aimed at modern marine installations where electric cooking replaces parts of the gas line to simplify safety management and exhaust arrangements. The quoted 700 W of sensible heat emission means that only a modest proportion of the input power leaves the appliance body into the room air as dry heat, making it easier to keep the galley within temperature design limits. The 280 W latent component reflects the moisture this unit contributes to the space during operation, which is the parameter extraction hoods and dehumidification capacity must be sized against.

For ship operators, the benefit is straightforward: when each cooking position publishes both sensible and latent heat emission, it becomes possible to add up the real thermal impact of the cooking suite rather than relying on generic allowances. That is particularly relevant where multiple induction modules are grouped together, because their combined heat rejection sets the minimum capacity of the local hood and the connected ductwork.

Build and control

• IP-rated water protection

The IP-rated water protection on the 7EHEI042DP5 supports cleaning regimes that involve frequent wet-washing of surfaces. In a marine galley where equipment is often cleaned down hard between services, this protection level reduces the risk of water ingress during routine maintenance, provided the unit is installed and operated according to the manufacturer’s instructions.

This module is well suited to vessels where air-conditioning load and humidity must be tightly controlled and where equipment-level heat emission data is required for approval and commissioning documentation. It is less suitable as a stand-alone answer to very high-output cooking demands, where larger bodies or additional modules from the same line would typically be combined to meet peak service load. Ordered under MKN product number 7EHEI042DP5.