MKN Electric Griddle Plate 1321130 – Smooth, HotLine

10.8 kW connected load on a single smooth plate gives the 1321130 enough surface power to work its full 705 x 545 mm area without cold spots. With an 800 x 700 x 700 mm body and one defined work zone, it is sized as a primary griddle module in a HotLine run rather than a small add‑on plate.

On a ship this footprint matters, because 800 x 700 mm has to be found on the cooking line without obstructing passageways or service routes. At 700 mm height the unit aligns with other HotLine bodies so pans slide cleanly between appliances, which simplifies installation on a stainless plinth or frame. Net weight is 102 kg, rising to 113 kg gross for transport and lifting calculations, so securing points and deck strength checks can be done from published numbers rather than guesswork. The 400 V supply specification aligns with a three‑phase galley distribution; it is not a light‑duty counter unit that needs adapting to a different voltage class.

The single work zone is a design choice that suits galley patterns where the whole 705 x 545 mm surface is either on or off, for example breakfast and main service. There is no split‑zone complexity for the crew, and thermostatic temperature control gives repeatability from shift to shift. Being prepared for connection to an energy optimisation system, the griddle can be integrated into a galley load‑shedding scheme so that its 10.8 kW demand is managed against other heavy consumers. That is relevant on vessels where installed generator capacity and hotel load must be tightly scheduled.

Construction is stainless steel 1.4301 (AISI 304) throughout, so the carcass, surface and external panels share the same material and corrosion behaviour. The published “self‑supporting closed construction” means the griddle is a rigid module in its own right, which simplifies setting it on a continuous substructure or integrating it into a line of HotLine appliances. The dimensions of 800 x 700 x 700 mm also give designers a clear module size for planning extraction canopies and splash protection, and the declared gross weight of 113 kg gives shipyards a figure for handling and installation equipment.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction
• Ergonomic knob control
• Prepared for connection to an energy optimisation system
• Thermostatic temperature control

This griddle is the right choice where the galley needs a full‑size smooth plate module tied into an energy optimisation system and a 400 V supply, and where one consistent temperature zone across 705 x 545 mm is operationally acceptable. It is the wrong choice where service patterns demand multiple independently controlled temperature zones on the same footprint, or where there is no capacity for a 10.8 kW appliance on the electrical schedule.

Ordered under MKN product number 1321130.