MKN Electric Griddle Plate 7EGRP040XM

7EGRP040XM is specified by MKN as an electric griddle plate with IP-rated water protection built in. That combination — electric heating and a defined ingress protection level — is what makes this particular unit relevant for shipboard galleys that are washed down rather than wiped.

On board, the decision to go electric on a griddle plate like the 7EGRP040XM ties the cooking line into the vessel’s electrical distribution instead of any fuel-based system. For the naval architect and electrical designer this means a clear, predictable load on the galley switchboard, without the additional ventilation and flue interfaces that combustion appliances introduce. At the same time, galley crews routinely use spray cleaning and generate a lot of moisture around the hot line. An IP-rated appliance is less vulnerable to that environment, so it is less likely to suffer nuisance faults from water ingress once the vessel is away from port support.

As a catalogue module, the 7EGRP040XM sits inside MKN’s modular planning logic. It can be laid out in a line-up with other MKN equipment to form a continuous cooking surface, or installed as a single griddle wherever the menu calls for direct plate cooking. The fact that it is electric simplifies integration with marine electrical standards: the designer can keep cooking equipment on a dedicated panel section and plan discrimination and load shedding around known loads. In that context, the IP-rated water protection is a durability feature as much as a hygiene one; the more resistant the enclosure is to spray, the less time the vessel spends troubleshooting avoidable moisture-related trips.

For the superintendent, the key point is that 7EGRP040XM is a standard MKN article number rather than a one-off special. That matters over the life of the vessel when spares, documentation and replacement units are needed. An off‑the‑shelf electric griddle plate with IP-rated water protection can be specified, installed and later replaced without bespoke engineering work, which shortens refit windows and simplifies approval with the yard.

Build and control

• IP-rated water protection

The 7EGRP040XM is the right choice where the concept calls for an electric griddle plate, where the owner wants to rely on IP-rated water protection during hose-down cleaning, and where the galley is already based around MKN’s modular equipment. It is the wrong choice if the project brief demands a different energy source, or where a non-standard plate geometry, surface treatment or integrated control system is mandated that cannot be met with this defined MKN article. In those cases a different model or a custom fabrication should be considered instead.

Ordered under MKN product number 7EGRP040XM (article number 7EGRP040XM).