MKN Grill Unit 10018733 – CounterSL

10 kW of gas power concentrated into 1 work zone is the defining figure on the MKN 10018733 grill unit. Within a 500 x 700 x 270 mm CounterSL body, it provides a 320 x 510 mm working surface sized for a compact counter run rather than a full galley line.

On a vessel, that 270 mm height and 500 x 700 mm footprint make the unit suitable where the cooking line is built into a serving counter or under a low deckhead. CounterSL modules are typically used at bistro points and smaller serveries, and this unit fits that pattern without demanding extra depth or width in the furniture. The single 10 kW gas load is also easier to integrate into an existing gas distribution than a bank of higher-output appliances, which matters in refits where the gas train is already fixed.

The 320 x 510 mm working surface gives a clear planning area for portions on a service counter. With only 1 work zone, the full surface runs at the same setting, so there is no need to manage multiple temperature bands or explain a complex control layout to rotating crew. That simplicity is an advantage in pantries or snack points where the grill is one of several small appliances an operator handles during a short, sharp service window.

Construction is in stainless steel 1.4301 (AISI 304) throughout. In a marine galley this aligns with standard benching and hoods, and gives consistent behaviour under steam and chemical cleaning regimes. The self-supporting closed construction means the 500 x 700 x 270 mm body is structurally complete, so it can sit as a finished module on the counter without relying on external frames or supports. Closed construction also avoids open undersides that trap grease and debris, reducing the cleaning time around the unit.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction
• Ergonomic knob control

Ergonomic knob control gives direct, visual confirmation of burner setting without navigating menus or displays. For a 10 kW grill with 1 work zone this is often the most practical choice: set the power, adjust by feel during service, and return to a known low or off position at the end of the shift. Fewer electronic components also means fewer specialised spare parts to stock for this specific unit.

This grill is the right choice where a single-zone 10 kW gas module is needed on a 500 x 700 mm CounterSL run for snacks, à la carte finishing or a small crew pantry. It is the wrong choice where the requirement is to handle continuous, high-volume grilling across multiple heat zones; that duty calls for larger multi-zone bodies rather than a compact 320 x 510 mm surface. Ordered under MKN article number 10018733.