MKN Induction Cooking Table 10010302 – Wok, Optima 850

A 350 x 350 mm working surface and a single wok zone on a 600 x 850 x 700 mm body set the scale of the MKN 10010302. At 5 kW electrical power on 400 V, it is sized as a focused high-output station rather than a multi-zone hob.

In a shipboard galley, that compact 600 mm width makes it easier to integrate this Optima 850 module into an existing cooking line without reworking the whole layout. The 700 mm height and 850 mm depth keep it in the same working plane as the rest of an Optima 850 block, so pans can be moved across without steps that collect dirt or catch on bases. Net weight is 48 kg, rising to 55 kg gross for transport, which matters when lifting to upper decks or moving the unit into place through narrow doors.

The 6 mm glass-ceramic top is mounted flush with the worktop, so there is no lip around the 350 x 350 mm induction zone to trap food soil. A flush surface is also easier to keep clean when the surrounding line is hosed down on a regular cleaning schedule. With one dedicated work zone, heat management and extraction design are straightforward: the galley designer knows exactly where the thermal load sits, and the 5 kW rating feeds directly into the electrical and HVAC calculations.

Supply at 400 V aligns the unit with common shipboard low-voltage distributions, avoiding the need for step-up or step-down transformers at the appliance. A single wok zone with electronic pan detection from 12 cm base diameter means the generator only energises when there is a suitable pan on the 6 mm glass-ceramic surface. The progressive power characteristic allows controlled ramp-up rather than on/off steps, which is important for tasks such as holding sauces at a steady simmer in a curved wok base.

Build and control

• Complies with DIN 18851 for commercial kitchens
• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction
• 6 mm glass-ceramic top, flush with the worktop
• Ergonomic knob control
• Heated by high-output induction generators
• High efficiency, low energy consumption
• Electronic pan detection from 12 cm base diameter
• PT 1000 overheating protection
• Progressive power characteristic

This unit is a good choice where a galley needs a defined wok position within an Optima 850 line, and where a 5 kW, single-zone configuration matches the production volume. It is not the right fit for operations that require several pans in parallel on one module; those should look at multi-zone bodies in the same series.

Ordered under MKN product number 10010302.