MKN Induction Cooking Table 1323111 – HotLine

10 kW of electrical power feeding a single induction work zone in a 400 x 400 mm field defines the MKN HotLine 1323111. Within a 500 x 700 x 700 mm body it delivers a concentrated cooking point rather than a multi-zone hob, useful where one heavy-use pan station has to fit into limited linear space.

On a vessel, the compact 500 mm module width and 700 mm depth simplify planning into an existing HotLine run or alongside other Optima-line equipment that shares the same depth. The 45 kg net weight makes handling in a refit manageable while still giving the mass needed to bolt down securely on a marine plinth or flanged feet. A 400 V connection aligns with common galley distribution boards, avoiding step-down transformers or non-standard circuits.

The working surface is a 6 mm glass-ceramic top, flush with the surrounding worktop so pans slide on and off without catching on edges. Induction generators underneath heat the pan directly, paired with electronic pan detection that recognises bases from 12 cm diameter. For a ship’s galley this focuses energy into the cookware instead of the room, reducing the sensible heat load the HVAC plant has to remove in a closed space. A single clearly marked work zone gives predictable coverage for standard stockpots and saute pans without overlapping fields.

Construction is in stainless steel 1.4301 (AISI 304) throughout, with radiused plate corners that remove the sharp internal angles where soil and moisture linger. The self-supporting closed construction means the unit reads as a single body, easier to seal to a plinth or deck foundation to satisfy hygiene and cleaning requirements. At 45 kg net and 50 kg gross, logistics from shore to ship and into the galley are straightforward compared with heavier multi-zone modules.

Build and control

• Complies with DIN 18851 for commercial kitchens
• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction
• 6 mm glass-ceramic top, flush with the worktop
• Radiused plate corners for easy cleaning; heating zones graphically marked
• Ergonomic knob control
• Heated by high-output induction generators
• High efficiency, low energy consumption
• Electronic pan detection from 12 cm base diameter
• PT 1000 overheating protection

This configuration suits galleys that need one strong induction position for a primary pan in a tight line, or as an upgrade from a single hotplate without reworking the whole cooking block. It is not the right choice where multiple pans must be held at different outputs at the same time; in those cases a larger module with several zones or a surface induction field gives more flexibility per metre of front.

Ordered under MKN product number 1323111 in the HotLine series.