MKN Induction Cooking Table 2023114 – 4 Zone, Electric, Optima 850

Twenty‑five point four kilowatts of installed electrical power on an 800 x 850 x 700 mm body gives the Optima 850 induction table 2023114 a compact but heavy‑duty profile. Each heating zone is rated at 5.4 kW, so four zones can all be run at full load without derating the unit.

On a shipboard galley plan, the 800 mm length and 850 mm depth tie directly into Optima 850 cooking lines and the surrounding stainless furniture. The 700 mm height and 146 kg net weight matter when the unit is to be fixed on a plinth or flanged feet for marine service, because structural support and any coaming height must be planned from those figures. With a 25.4 kW electrical load at 400 V, the table belongs on the main galley distribution board rather than a light‑duty circuit, and that demand has to be counted into the vessel’s hotel load and HVAC sizing.

The working surface on this model is 700 x 690 mm, covered by a 6 mm glass‑ceramic top that sits flush with the worktop. That footprint gives a usable induction field without breaking the single‑level work surface that Optima 850 lines are designed around, so pans can be moved across the 700 mm length without catching on edges. Complying with DIN 18851 for commercial kitchens, and built throughout in stainless steel 1.4301 (AISI 304), the carcass is specified for hygiene and cleanability rather than as a light-duty counter insert.

Under the glass‑ceramic, the unit is heated by high‑output induction generators. Electronic pan detection from a 12 cm base diameter means that smaller pans are recognised and larger pans do not need to be placed with millimetre accuracy to pick up power. PT 1000 overheating protection provides temperature monitoring at sensor level, backing up the inherent control of the induction electronics. The published gross weight of 159 kg is the shipping figure, which is relevant for getting the appliance aboard and into position where access routes are tight.

Build and control

• Complies with DIN 18851 for commercial kitchens
• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction
• 6 mm glass-ceramic top, flush with the worktop
• Radiused plate corners for easy cleaning; heating zones graphically marked
• Ergonomic knob control
• Heated by high-output induction generators
• High efficiency, low energy consumption
• Electronic pan detection from 12 cm base diameter
• PT 1000 overheating protection

This cooking table is the right choice where an Optima 850 line needs a four‑zone induction module with a defined 25.4 kW electrical demand and generous 700 x 690 mm working surface. It is less suitable where the electrical reserve on the switchboard cannot support a 400 V, 25.4 kW appliance, or where a smaller body depth is required to match existing furniture. Ordered under MKN product number 2023114.