Electrolux Professional Grill Top 391367 – 900XP, Electric Grill Top HP 800mm

Seven hundred and five millimetres of cooking width on a 598 mm deep plate gives the 391367 enough surface to carry a full service on a single 800 mm module. At 250 mm body height it drops onto a 900XP base or bridge frame without disturbing the existing line-up.

On a marine project the supply specification is the first filter, and this grill is set up for shipboard switchboards at 440 V/3 ph/50/60 Hz. That avoids running a special distribution just for one appliance and keeps it in step with other 900XP and thermaline modules already specified at 440 V. Depth at 930 mm must be read against the galley plan: in a narrow corridor galley that extra projection into the working aisle can pinch circulation if it is not accounted for early.

The cooking surface dimensions — 705 mm wide by 598 mm deep — define how the unit is used in practice. That width allows multiple zones of work across the plate, while the depth gives space to pull product forward for finishing or holding without leaving the grill. On a long voyage where the galley runs fixed menus, the predictable footprint helps planners decide what moves to this grill and what stays on open burners or fry tops. Net weight is 85 kg, a figure that matters when agreeing how the unit will be lifted into place and what the supporting structure under a cantilevered installation has to carry.

Overall external dimensions are 800 mm in width, 930 mm in depth and 250 mm in height. In a 900XP block these numbers align with compatible bases and refrigerated or neutral cupboards below, so the grill top can sit over storage without overhangs or dead corners that trap soil. The 250 mm height keeps the working surface in the same plane as adjacent modules, which simplifies pan movement across the line and reduces snag points where grease and debris would otherwise accumulate. The certification group quoted as HEG9E2 is relevant for designers who align their selection with internal cataloguing or approval frameworks.

Build and control

• AISI 304 (1.4301) stainless steel construction
• Scotch-Brite finished exterior panels
• Flush-fitting side edges for gap-free installation
• Stainless steel splash guards

This unit is a sensible fit where an 800 mm slot is available on a 900XP suite and a dedicated grill surface is needed without specifying a separate freestanding appliance. It is not the right choice for very compact galleys that are built around 700 mm depth; in those spaces a shallower range body keeps more room in the aisle. Ordered under Electrolux Professional product number (PNC) 391367.