Electrolux Professional Water Mixing Tap 589938 – thermaline 90, Water mixing tap with lever, 1 Side - H=250

Twenty-five kilograms for a 200 mm wide top module tells you this thermaline 90 water mixing tap is a structural piece of the block, not a light afterthought. At 900 mm depth and 250 mm height it occupies a full thermaline 90 top footprint, so it drops into the line with no compromise to the working surface.

On board, that 900 mm depth matters because the cooking run often backs directly onto a bulkhead or a service corridor. Matching the rest of the thermaline 90 modules keeps the front edge straight and avoids steps in the line that collect soil or interrupt workflow. The 250 mm top height allows the tap to sit at the same level as adjacent equipment, so pans move across without lifting. With a self-contained 25 kg body, the module behaves like any other piece of the block when it is welded or bolted down to meet marine fixing and hygiene requirements.

Construction is in AISI 304 (1.4301) stainless steel, including a stainless steel internal frame under the drop-nose worktop. Being built to DIN 18860-2 with a drop-nose worktop means the front profile aligns with other DIN-based bases and tops in the galley. External dimensions are 200 mm in width, 900 mm in depth and 250 mm in height, which should be checked against the available linear space when planning the cooking line or pass. The net weight of 25 kg is relevant for both deck loading calculations and for deciding whether the module can be manhandled into position before final fixing.

Water connections are sized at 3/4" for both the inlet water line and the incoming cold/hot water line. Using the same 3/4" figure across both feeds simplifies tie-in to the ship’s domestic hot and cold manifolds and avoids adapters at the back of the unit. Specifying a water mixing tap with lever gives the galley a single point to set the working temperature at that position, which is particularly relevant on a line where blanching, pot filling or cleaning are done right next to the cookers. The 200 mm width keeps the footprint under control while still allowing a usable tap area.

The module follows the thermaline 90 pattern of a one-side working face. In practice that means it serves the operator side of the block only, which suits an against-bulkhead installation or a one-sided island line. With front access to components for service, maintenance can be done from the working side without disturbing the way the unit is fixed to the deck or plinth.

Build and control

• AISI 304 (1.4301) stainless steel construction
• Built to DIN 18860-2 with drop-nose worktop
• Stainless steel internal frame
• Front access to components for service

This is the right choice where a thermaline 90 block is already specified and a fixed water point is needed within the line for filling, rinsing or cleaning. It is the wrong choice for a preparation area that only needs a simple sink or wall-mounted tap, because using a 200 mm by 900 mm, 25 kg modular top there consumes both budget and deck space without taking advantage of the thermaline interface. Ordered under Electrolux Professional product number 589938.