Professional Galley Equipment for Marine & Aviation

Miele Washer-Dryer Stack PDW 909 [EL DP DD SOM] – 3N AC 400 V 60 Hz, Stainless steel

Miele PDW 909 Benchmark washer-dryer stack, 9+9 kg with 80/180 l drums and 3N AC 400 V 60 Hz washer supply.

ManufacturerMiele
ModelPDW 909
DesignationPDW 909 [EL DP DD SOM]
Article number51909520SOM
Material number12341260

Miele Washer-Dryer Stack PDW 909 [EL DP DD SOM] 12341260 Overview

Nine kilograms of washing and nine kilograms of drying per cycle in one front-loading stack define the PDW 909 as a Benchmark Performance Plus column for a ship’s laundry. The washer-extractor drum volume is 80 l with a 1:9 fill ratio, and the tumble dryer drum is 180 l with a 1:20 fill ratio, so both sides are dimensioned around repeated 9 kg batches.

On board, the separate electrical data for each half of the stack are as important as the mechanical format. The washer-extractor runs on 3N AC 400 V 60 Hz with a 7.95 kW heater rating and 8.2 kW total connected load on a 16 A fuse rating. The tumble dryer has its own 3N AC 400 V 50/60 Hz connection with a 7.94 kW heater rating, the same 8.2 kW connected load and a 16 A fuse. That separation lets the electrical design size cabling and protection correctly for each appliance and check the effect on a 400 V distribution.

Specific consumption and cycle times are declared. Water use on the washer-extractor is 6.6 l/kg with a specific energy consumption of 0.03 kW per kilogram at the rated load. The 45 minute programme finishes at 1300 rpm, with a g-factor of 518. Residual moisture is 47 % with cold rinse and 44 % with hot rinse, which is the starting point for the exhaust air dryer. On the dryer side, specific energy consumption is 0.51 kWh/kg with a maximum evaporation capacity of 7.4 l/hour and a quoted 36 minute programme duration, so a full wash–dry sequence can be planned into the duty rota.

The stack stands 1940 mm high, 692 mm wide and 761 mm deep. Net weight is 208 kg with a maximum floor load of 3235 N, figures a naval architect can use directly in deck loading and stiffening calculations. Heat dissipation into the room is 3 MJ/h from the washer and 1.62 MJ/h from the dryer; in a compact laundry that load lands on the ventilation and air-conditioning plant. The emission sound pressure level is 63 dB(A) re 20 µPa. Door openings are 370 mm on the washer and 440 mm on the dryer, both with a 180° opening angle and hinges arranged “washing right / drying left” so loading and unloading can be handled from one working position.

The application examples tie the 9 kg rating to actual textile mixes. One cycle can take 204 cloths at 22 g, or 42 cotton mops at 40 cm, or 33 cotton mops at 50 cm, or 47 microfibre mops at 50 cm. Personal protective equipment and bedding are also covered: 4 respirator masks, 1 protective suit and 2 over jackets, or 1 synthetic duvet and 2 synthetic pillows, or 1 down duvet and 2 down pillows. The same machine is specified to process 2 summer horse blankets where those are part of the load profile.

Build and control

• Front-loading stack construction in the Benchmark series, Performance Plus range
• Stainless steel front
• Washer-extractor load capacity 9 kg in an 80 l drum (fill ratio 1:9)
• Tumble dryer load capacity 9 kg in a 180 l drum (fill ratio 1:20), exhaust air drying system
• M Touch Pro Plus washer controls, freely programmable
• M Touch Pro tumble dryer controls with residual moisture controlled programmes
• Automatic door lock with 180° door opening, hinges washing right/drying left
• Detergent drawer with 3 compartments and up to 6 liquid dispenser connections
• Drain pump DN 22
• Specific water consumption 6.6 l/kg, washer energy 0.03 kW/kg
• Tumble dryer specific energy 0.51 kWh/kg and 7.4 l/h maximum evaporation capacity
• Remaining cycle time display and detergent empty sensor
• WiFi networking, Connector Box and peak-load / energy management connectivity
• Specified and approved for shipboard use; specified for offshore installations

This unit fits vessels that need repeated 9 kg cycles with washing and drying on one material number within a defined 3235 N floor load and 3N AC 400 V supplies. It is the wrong choice where individual batches are routinely larger than 9 kg, because loads above that point would have to be split across multiple programmes, underusing the 80 l and 180 l drum volumes. Ordered under Miele material number 12341260 and article number 51909520SOM.

Key features of the 12341260

  • Automatic door lock
  • Specified for offshore installations
  • Specified and approved for shipboard use
  • Remaining cycle time display
  • Detergent empty sensor
  • Can be tied into a peak-load / energy management system
  • WiFi networking
  • Connector Box for external systems

12341260 technical specifications

ManufacturerMiele
ModelPDW 909
DesignationPDW 909 [EL DP DD SOM]
Article number51909520SOM
Material number12341260
EAN4002516703099
Construction typeFront-loading stack
SeriesBenchmark
RangePerformance Plus
FrontStainless steel
Washer-extractor load capacity in kg9
Tumble dryer load capacity in kg9
Washer-extractor fill ratio1:9
Tumble dryer fill ratio1:20
Washer-extractor drum volume in l80
Tumble dryer drum volume in l180
Drying systemExhaust air
Washer-extractor door opening [Ø] in mm370
Tumble dryer door opening [Ø] in mm440
Door opening angle in degrees180
Door hingeWashing right/drying left
Specific water consumption in l/kg6.6
Specific washer-extractor energy consumption in kW0.03
Specific tumble dryer energy consumption in kWh/kg0.51
Maximum tumble dryer evaporation capacity in l/hour7.4 l
Washer-extractor programme duration in min.45
Tumble dryer programme duration in min.36
Residual moisture with cold rinse in %47
Residual moisture with hot rinse in %44
Washer-extractor spin speed in rpm.1300
Washer-extractor g-factor518
Control type for washing machineM Touch Pro Plus
Control type for tumble dryerM Touch Pro
Programmability for washing machineFreely programmable
Tumble dryer programme controlsResidual moisture controlled
Max. delay start in h for washing machineFreely selectable
Max. delay start in h for tumble dryer24
Detergent drawer3 compartments
Maximum number of connections for liquid dispenser6
Type of heating washing machineElectric
Type of heating tumble dryerElectric
Electrical connection washing machine3N AC 400 V 60 Hz
Heater rating washing machine in kW7.95
Total connected load washing machine in kW8.2
Fuse rating washing machine in A16
Electrical connection tumble dryer3N AC 400 V 50/60 Hz
Heater rating tumble dryer in kW7.94
Total connected load tumble dryer in kW8.2
Fuse rating tumble dryer in A16
Cold water [number]1x 1/2" hose w/ 3/4" th. union
Hot water [number]1x 1/2" hose w/ 3/4" th. union
Drain pumpDN 22
External dimensions, net height in mm1940
External dimensions, net width in mm692
External dimensions, net depth in mm761
Net weight in kg208
Gross weight in kg232
Maximum floor load in N3235
Emission sound pressure level in the workplace63 dB(A) re 20 µPa
Washing machine heat dissipation into the room in MJ/h3
Tumble dryer heat dissipation into the room in MJ/h1.62
Respirator masks [number]4
Protective suits [number]1
Over jackets [number]2
Synthetic duvets [number]1
Synthetic pillows [number]2
Down duvets [number]1
Down pillows [number]2
Cloths, 22 g [number]204
Cotton mops, 40 cm [number]42
Cotton mops, 50 cm [number]33
Microfibre mops, 50 cm [number]47
Summer horse blankets [number]2

Also listed under

Questions about the 12341260

What electrical supplies does the Miele PDW 909 require?

The washer in the PDW 909 stack requires 3N AC 400 V 60 Hz with a 7.95 kW heater, 8.2 kW total connected load and a 16 A fuse rating. The tumble dryer requires 3N AC 400 V 50/60 Hz with a 7.94 kW heater, 8.2 kW connected load and a 16 A fuse.

What are the capacity and drum volumes of the PDW 909 stack?

The PDW 909 washer-extractor has a 9 kg load capacity with an 80 l drum and a 1:9 fill ratio. The tumble dryer also takes 9 kg, with a 180 l drum and a 1:20 fill ratio.

How much space and floor load does the PDW 909 need on board?

The PDW 909 measures 1940 mm in height, 692 mm in width and 761 mm in depth, with a net weight of 208 kg. The maximum floor load is specified at 3235 N.

Where the 12341260 is used

Marine Galley Equipment Ship Galley Equipment Yacht Galley Equipment Commercial Vessel Galley Equipment Offshore Galley Equipment

Miele, manufacturer of the 12341260

Miele & Cie. KG — German manufacturer of commercial laundry and dishwashing technology, supplying ships, yachts and offshore units for more than fifty years. Configured to order — tell us the vessel and the supply voltage and frequency, and we will quote the correct build.

All Miele equipment

Downloads for the 12341260

Technical datasheet (PDF)

Similar Washer-Dryer Stack PDW 909 [EL DP DD SOM]s

Get pricing for the Miele Washer-Dryer Stack PDW 909 [EL DP DD SOM] – 3N AC 400 V 60 Hz, Stainless steel

Add it to your quote basket with anything else you need, or request a quotation for this item alone.

Request a Quote