MKN FlexiChef Team Multifunctional Appliance FCEKMP22XX-1XX – FlexiChef, 100 + 50 litres

Two work zones at 100 + 50 litres in a 2400 x 850 mm body define the MKN FlexiChef Team FCEKMP22XX-1XX. Electrical power is split 22,4 + 14,7 at 400 V, so this single frame concentrates a significant thermal load into one piece of equipment.

On a shipboard galley plan, a 2400 x 850 mm footprint and 750 mm height make this a primary line component rather than a peripheral appliance. It replaces two separate pans and their individual foundations with one 610 kg unit, which simplifies bolting and sealing to the deck but makes structural coordination more important. The fixed 400 V supply and the declared 22,4 + 14,7 electrical power figure give the electrical designer a clear number to reserve on the distribution board.

The larger pan offers a 723 x 543 x 315 mm working surface with 100 litres capacity, giving enough volume for main production items in a single vessel. Alongside it, the 523 x 543 x 225 mm pan with 50 litres capacity provides a second work zone for side dishes or smaller batches. The different depths at 315 mm and 225 mm influence handling: basket immersion depth and liquid loading are not the same across the two, so the galley has to plan which recipes sit in which side rather than treating them as interchangeable.

Total connected load is divided between the pans: 22,4 on the 100 litre side and 14,7 on the 50 litre side. That separation matters on board because many services will run only one pan during quieter periods, and the electrical draw of that choice can be read directly from the specification. The 400 V rating aligns with common marine practice where galley equipment is specified to a three-phase supply matched to the vessel’s main switchboard.

At 610 kg net weight, this is a structural item for the naval architect. A 2400 mm long, 850 mm wide appliance of that mass needs a checked support grid and fixing detail, especially where it sits over insulation or on a coaming. The 750 mm body height leaves vertical space for extraction and service runs above, but the length demands a clear run in the cooking line without doors, pillars or traffic pinch points intruding on the working edge.

Build and control

• Hinged lid
• Fully welded seams
• Drain valve
• Stainless steel 1.4404 (AISI 316L) wetted parts

Stainless steel 1.4404 (AISI 316L) on the wetted parts is specified for the food-contact and heated surfaces, helpful where chloride-bearing stocks and cleaning agents are used daily. Fully welded seams and the integrated drain valve reduce potential soil traps and support cleaning routines built around fast drainage and full wash-down of the pan surfaces. The hinged lid keeps the cover captive on the frame, so there is no separate loose component to stow or secure when the vessel is moving.

This configuration is the right choice where a galley genuinely needs two independent pans of 100 and 50 litres in one continuous 2400 mm module and can commit the published electrical load and deck capacity to it. It is the wrong choice where production can be handled in a single pan, or where the line cannot spare 2400 mm of uninterrupted length for one appliance. Ordered under MKN product number FCEKMP22XX-1XX.