MKN FlexiChef Team Multifunctional Appliance FCEKMP22XX-2XX – FlexiChef, 100 + 75 litres

Two independently driven pans in one body give the FCEKMP22XX-2XX a combined 100 + 75 litre working capacity in a footprint of 2600 x 850 x 750 mm. That length allows a full Size 3 pan alongside a shorter Size 2 pan, so a galley can cook different batch sizes without committing deck space to two separate appliances.

On a shipboard line, that 2600 mm run needs to be planned against the cooking suite and passageways, because once a multifunctional unit of this scale is welded down it becomes part of the galley structure. The 850 mm width matches the deeper modular cooking systems, which simplifies integration into an Optima 850-style block where pans, ranges and kettles sit in a single plane. At 640 kg net weight, this is a structural item rather than a loose appliance, and naval architects will usually treat it as a fixed load on the deck. The 400 V supply aligns with the three-phase services normally routed through a main galley, keeping the unit on the same distribution as other heavy cooking consumers.

The working surface is split between a 1023 x 543 x 225 mm pan and a 723 x 543 x 225 mm pan. The larger section takes the 100 litre side of the capacity, while the smaller pan covers 75 litres. In practice that means high-volume production on one side and a smaller batch, special diet preparation or a holding function on the other, without cross-scheduling or reconfiguring the line. Both pans have the same depth, so cooking characteristics and fill heights are predictable between the two zones, and operators do not have to adapt cooking procedures when moving from one side to the other.

Installed electrical power is 22,4 + 22,4, with each pan driven as an independent heating system on the common 400 V feed. That separation allows one side to be run hard for boiling work while the other is held at a lower heat load, instead of cycling a single, larger vessel up and down. For a ship that has to manage generator loading through the day, spreading demand across two controllable zones at 22,4 each gives more flexibility in matching galley duty to available electrical capacity.

Build and control

• Hinged lid
• Fully welded seams
• Drain valve
• Stainless steel 1.4404 (AISI 316L) wetted parts

The hinged lid arrangement suits a galley where overhead clearance and workflow make sliding covers awkward, and the fully welded seams are a hygiene and durability advantage when the unit is cleaned with aggressive methods in a salt-laden environment. Stainless steel 1.4404 (AISI 316L) for all wetted parts is a clear signal that the pan is intended for regular contact with food and cleaning chemicals in marine service, where lower alloy grades are more prone to pitting.

This Team configuration fits a main galley or large crew galley that genuinely needs 100 litres of production capacity on one side of the pan and a separate 75 litre process alongside it. It is less suitable for a very tight galley where a single smaller multifunctional pan can cover the menu, or where the line concept is built around individual, narrow modules rather than a 2600 mm block. Ordered under MKN product number FCEKMP22XX-2XX.