MKN FlexiChef Team Multifunctional Appliance FCEKMP23XX-2XX – FlexiChef, 150 + 75 litres

Two pans sharing 150 + 75 litres of capacity on one chassis, with 22,4 + 34,0 kW connected load at 400 V, define the FlexiChef Team FCEKMP23XX-2XX. The larger work zone offers 1023 x 543 x 315 mm of surface, the smaller 723 x 543 x 225 mm, so one body covers both bulk cooking and smaller batches in a single footprint.

At 2900 x 850 x 750 mm and a net weight of 705 kg, the unit becomes a fixed element in the galley layout rather than a movable appliance. That size of footprint suits a main cooking line where deck area has already been allocated to a continuous block, and where power, water and drainage can be routed to a single position. Concentrating 150 + 75 litres in one station also simplifies the discussion with the yard or refit team about plinths, flanged mounting or welded foundations, because both work zones sit on the same base.

Electrically the FCEKMP23XX-2XX is specified at 400 V and splits its power between the two pans: 22,4 kW on the 75 litre side and 34,0 kW on the 150 litre side. That load has to be carried by the galley distribution, so it belongs in the early-stage coordination between catering designer and electrical engineer. The twin work zones allow one pan to run independently when demand is low, or both to be used together when the menu calls for parallel production at full capacity. The working surfaces of 1023 x 543 x 315 mm and 723 x 543 x 225 mm set the practical batch size, and the 750 mm overall height fixes the working level relative to adjacent modules.

The pan interiors and all wetted parts are in stainless steel 1.4404 (AISI 316L), which is the material exposed to food, brine and alkaline cleaning solutions. Fully welded seams give a closed envelope rather than a frame with separate inserts, reducing joints in the splash zone. The hinged lid keeps heat and steam in the pan when closed and, when open, stays on the body without needing side clearance. The integrated drain valve provides controlled emptying of product or wash water, so liquids leave the pans through a defined outlet rather than being lifted or bailed.

Build and control

• Hinged lid
• Fully welded seams
• Drain valve
• Stainless steel 1.4404 (AISI 316L) wetted parts
• Two work zones in one 2900 x 850 x 750 mm body

This Team configuration is a good fit for a main galley that needs both a 150 litre pan and a 75 litre pan in constant use and wants them concentrated on one 2900 mm section of line at a single 400 V connection. It is the wrong choice for small galleys where typical batches do not justify 150 litres, or where the electrical plant cannot comfortably support 22,4 + 34,0 kW on one appliance. On vessels where equipment must be manoeuvred through tight accesses or moved for cleaning, the 705 kg net weight and fixed 2900 x 850 mm footprint are also clear constraints to check against.

Ordered under MKN product number FCEKMP23XX-2XX.