MKN FlexiChef Team Multifunctional Appliance FCEKMP23XX-2XX – FlexiChef, 150 + 100 litres

Two separate pans with 150 and 100 litre capacities in one 2900 mm long body set the character of the FCEKMP23XX-2XX. One working surface runs to 1023 x 543 x 315 mm and the other to 723 x 543 x 315 mm, so this FlexiChef Team unit pairs a larger and a smaller zone in a single frame.

On board, that split lets production and finishing run side by side without duplicating appliances or giving up extra deck area. The 850 mm width and 750 mm height keep the footprint in the Optima line, so the block can sit with other cooking modules while the two pans take different duties or menus. A galley that has to serve different complements in quick succession can keep one pan on core starches or sauces and the other on small-batch work.

Each pan is specified as a working surface rather than just a nominal capacity, which matters when the task is grilling or shallow frying rather than boiling. The 1023 x 543 x 315 mm zone with 150 litres of volume is the one that carries main production, while the 723 x 543 x 315 mm and 100 litres are the natural fit for smaller cycles or separate diets. The carcass comes in at 2900 x 850 x 750 mm and a net weight of 705 kg, so the mounting and substructure have to be planned as part of the galley package rather than treated as generic bench kit.

Electrical supply on this variant is 400 V. The two pans do not share a single rating: electrical power is listed as 22,4 and 34,0, reflecting the different lengths and volumes. That distinction becomes a practical point when the shipyard and the yard electricians are balancing the cooking line against the available breakers in the distribution board.

The hinged lid keeps the working surfaces covered when needed and is part of the thermal and moisture control around the pans. With two work zones, a lid that moves cleanly and predictably in a tight galley space is a genuine handling point, especially when one side is in active use and the other is idle or being cleaned.

Build and control

• Hinged lid
• Fully welded seams
• Drain valve
• Stainless steel 1.4404 (AISI 316L) wetted parts

Wetted parts in stainless steel 1.4404 (AISI 316L) tie the construction to a material choice that withstands the salt and cleaning chemistry that come with shipboard catering. Fully welded seams and a drain valve belong as much to the cleaning regime as to cooking: this is a piece of equipment that will be hosed, brushed and drained many times a day when it is in full use.

This FlexiChef Team configuration is the right choice where the galley needs two independent pans in one 2900 mm footprint and can make use of the 150 and 100 litre split. It is the wrong choice for a very small shipboard galley that will never run two pans at once and would carry the weight and electrical load of 705 kg of equipment and dual power ratings without using the capacity. Ordered under MKN product number FCEKMP23XX-2XX.