MKN Magnum Multifunctional Bratt Pan 10019141 – Tilting, Electric, Optima 850

65 litres of pan volume on a 700 x 540 mm working surface is what defines this Magnum bratt pan variant in an Optima 850 line. At 14.6 kW connected load and a single work zone, it is sized as a primary production pan for a medium galley rather than a small garnish station.

At 1300 x 850 x 700 mm, the body follows the Optima 850 modular depth while keeping the overall height down so it can sit under existing extraction and sprinklers without reworking the deckhead. The unit runs at 400 V, which aligns with many shipboard three‑phase distributions, so it can usually be fed from the main galley sub‑board without a dedicated transformer. A net weight of 222 kg and gross 262 kg are important for the naval architect and yard, both for deck loading and for planning how the unit is brought aboard and shifted into position.

The pan itself gives a 700 x 540 mm footprint at 210 mm depth, which is a usable geometry for shallow frying, braising and shallow boiling. With 65 litres quoted capacity in that well, chefs can batch cook staple items in a single charge without overfilling the pan. Being part of the Optima 850 series also means it connects physically and visually with other 850‑deep modules, which simplifies bench runs and service routing beneath the top.

Electrically, the 14.6 kW rating at 400 V dictates cable sizing and breaker selection, and it also feeds into the HVAC calculation: the entire load lands in the galley as heat that has to be removed. With one work zone, control is straightforward and there is no need to train staff on multi‑zone logic. The far‑forward pivot point allows controlled tilting when transferring product into gastronorm pans or kettles, which limits spillage and reduces the risk of staff injury when the pan is full. The double‑walled hinged lid with swivel joint and condensate drip strip helps keep steam in the pan instead of in the room when closed, supporting both product quality and humidity management.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction
• Stainless steel 1.4404 (AISI 316L) wetted parts
• Prepared for connection to an energy optimisation system
• Fully welded seams
• Far-forward pivot point for controlled pouring
• Double-walled hinged lid with swivel joint and condensate drip strip

This unit fits where a galley needs a dedicated multifunctional bratt pan with 65 litres of working volume, within the footprint of an Optima 850 module and on a 400 V electric supply. It is not the right choice where the menu or production volume clearly points to much larger batch sizes, because the 700 x 540 mm pan and 65 litre capacity then become the constraint. Ordered under MKN product number 10019141.