MKN Magnum Multifunctional Bratt Pan 10019170 – Optima 850

Seventy-seven litres in a 700 x 540 x 250 mm pan makes the MKN Magnum 10019170 a deep, compact workhorse within a single Optima 850 module. With an overall footprint of 1000 x 850 x 700 mm, it occupies just one position in a line while delivering a full-size production surface for one cooking station.

On board, that ratio of capacity to footprint helps when cooking and shallow braising have to share the same length of suite. One work zone simplifies planning of production runs and makes the heat load predictable, and a defined 14.4 kW electrical power draw at 400 V is straightforward to assign on the galley distribution board. The quoted net weight of 195 kg and gross weight of 228 kg are the values the naval architect and yard need when checking deck loading and moving the unit into place.

The 700 x 540 x 250 mm working surface is proportioned so that a watch can handle bulk sauces or stews within one batch, with the depth supporting the full 77 litres without pushing product too close to the pan rim. The overall height of 700 mm should be checked against adjacent Optima 850 bodies and any overhead service gantries, so lid opening and access to the back edge of the pan remain clear once the line is installed.

Electrical specification is 400 V with 14.4 kW connected load. In practice this gives enough power headroom to take the 77-litre capacity up to working temperature without overloading a typical galley sub-distribution, provided the energy optimisation system is configured correctly. A single work zone suits galleys that run defined batch cycles rather than trying to hold several temperatures in one surface; where the service pattern depends on multiple temperatures at once, separate pans or another multifunctional appliance configuration will usually be the better route.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Stainless steel 1.4404 (AISI 316L) wetted parts
• Self-supporting closed construction
• Fully welded seams
• Drain valve
• Double-walled hinged lid with swivel joint and condensate drip strip
• R3/4" tap with 250 mm reach
• Prepared for connection to an energy optimisation system

Material selection separates the structure from the food-contact surfaces: 1.4301 (AISI 304) stainless steel is used throughout the body, while 1.4404 (AISI 316L) is specified for wetted parts. Fully welded seams and a self-supporting closed construction limit external dirt traps and simplify cleaning around the corpus. The double-walled hinged lid on a swivel joint keeps heat and condensate over the 77-litre pan, with a condensate drip strip guiding liquid back into the working surface rather than onto the deck. The integrated drain valve and the R3/4" tap with a 250 mm reach give controlled filling and emptying, reducing manual handling of hot product and water at the pan edge.

Prepared connection to an energy optimisation system means the 14.4 kW load can be integrated into a managed galley power scheme instead of operating as an isolated consumer. This is useful where several heavy consumers share a limited 400 V supply.

This Magnum bratt pan is the right choice where a single 77-litre work zone is needed within an Optima 850 suite and the shipboard supply is 400 V. It is the wrong choice for very confined galleys that cannot dedicate a 1000 x 850 mm footprint to one pan, or for operations that require several independently controlled temperature zones within a single cooking surface. Ordered under MKN product number 10019170.