MKN Magnum Multifunctional Bratt Pan 10019175 – Optima 700

A 96 litre working volume in a 700 x 540 x 300 mm pan makes the MKN 10019175 a main-line Magnum bratt pan rather than a small side appliance. The 1000 x 700 x 700 mm body keeps that capacity in a compact Optima 700 footprint that fits a tight galley line.

That combination of volume and depth matters aboard because deck space, working height and cleaning access are all constrained. At 700 mm overall height, the pan edge stays within easy reach from the deck, which helps when working with hot product in a moving shipboard environment. The 700 mm width matches the Optima 700 line, so the unit can be planned into a continuous cooking block without creating steps or recesses that trap soil. A net weight of 158 kg, with 191 kg gross, is a concrete figure for the yard’s lifting plan and for the naval architect checking deck loading under the galley.

Electrically, the pan is rated at 14.4 kW on a 400 V supply. That load belongs on a main cooking distribution rather than a small-auxiliary panel, and it is significant in the galley’s electrical balance. Concentrating 14.4 kW into a single work zone over 700 x 540 mm gives the heat density needed for searing, shallow-frying and batch braising across the 96 litre volume without long recovery times between loads. One work zone means the entire pan runs at a single temperature, which simplifies operation and suits menu planning built around large single batches.

The 300 mm pan depth helps keep splashes inside the envelope, reducing fat and liquid reaching adjacent modules and the deck. When the cook cycle is over, the integrated drain valve lets hot stock, sauces or frying medium leave the pan in a controlled way, so there is no need to move heavy, hot containers across the galley. The double-walled hinged lid on a swivel joint, with its condensate drip strip, keeps condensate falling back into the pan instead of onto the worktop, cutting down wipe-down time after service.

Construction uses stainless steel 1.4301 (AISI 304) throughout, with wetted parts in stainless steel 1.4404 (AISI 316L). That pairing gives a consistent 1.4301 outer shell with 1.4404 in the areas permanently exposed to product and water. Fully welded seams and the self-supporting closed construction reduce open joints where food soil and cleaning water could collect. The unit is prepared for connection to an energy optimisation system, allowing it to be integrated into a wider galley load-management strategy. An R3/4" tap with 250 mm reach is built in for filling and topping up the 96 litre pan directly.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Stainless steel 1.4404 (AISI 316L) wetted parts
• Self-supporting closed construction
• Fully welded seams
• Drain valve for controlled emptying of the 96 litre pan
• Double-walled hinged lid with swivel joint and condensate drip strip
• R3/4" tap with 250 mm reach for filling and top-up
• Prepared for connection to an energy optimisation system

This Magnum bratt pan is the right choice where a single 96 litre, single-zone surface can be kept busy through production and where the galley layout is built around the Optima 700 depth. It is the wrong choice where service routinely needs two different temperature regimes in the same footprint, because the 10019175 provides only one work zone across the entire 700 x 540 mm surface. Ordered under MKN product number 10019175.