MKN Work Table 10013344 – CounterSL

Two hundred millimetres of length on a 700 mm deep work surface puts the MKN 10013344 at the very short end of the CounterSL range. With a 270 mm overall height it reads as a low counter element, not as a full-height galley table, which makes its role in a layout very specific.

On board, a 200 x 700 mm module is what closes a stainless run cleanly where the available length is tight, without forcing a wider section into a servery, buffet or front-cooking counter. Designers use sections in this size to bridge over service spaces or equipment bays so that the visible stainless plane stays continuous, while the structure and services sit in the furniture below. The low 270 mm corpus height makes this feasible over low bodies where a taller table would conflict with existing heights or sight lines.

The specification is straightforward: overall dimensions are 200 x 700 x 270 mm (L x W x H), and the working surface itself is listed at 200 x 700 mm. That means the full plan area is usable; there is no setback or reduced top within the footprint. In a marine context that simplifies both drawing and fabrication, because the same 200 x 700 mm module dimension can be carried through the counter system when ordering or welding adjacent sections.

Stainless steel 1.4301 (AISI 304) throughout is the material call-out for this unit. In practice, that gives a familiar surface to shipboard catering teams, aligned with the stainless used on much of the surrounding galley and counter furniture. Day-to-day cleaning with detergents and regular contact with trays and utensils are what set the material choice here, and using 1.4301 consistently across the work surface and body keeps behaviour under cleaning and use predictable.

Because the unit is only 270 mm high, it is best thought of as a stainless superstructure rather than a table with its own leg frame. In many installations the 10013344 will be set out above refrigerated bases, storage cupboards or other low equipment, where it provides the 200 x 700 mm work surface and visible finish while the structural load is carried by the base furniture. The combination of a short 200 mm length and the 700 mm depth allows it to align with other CounterSL bodies on depth while only adding a small increment to the total counter length.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction

This unit is the right choice where a small 200 x 700 mm section is needed to complete a CounterSL run, to cover a narrow service bay or to maintain a continuous stainless top over low bodies set out at 270 mm height. It is the wrong choice where the requirement is for a primary preparation bench, a standing-height work table or significant storage volume, because its 270 mm corpus height and 200 mm length do not provide the working height or the undercounter space those duties need. Ordered under MKN product number 10013344.