MKN Work Table 10013345 – CounterSL

A 300 x 700 mm working surface at a 270 mm overall height sets this CounterSL table apart from standard galley benches. It is sized as a low counter element rather than a full-height preparation table, so it can sit in front-cooking lines or compact service counters without dominating the space.

On board, that 270 mm corpus height matters where counters, sneeze guards and serving lines are tightly stacked under a fixed deckhead. A low work table like this can be built into a buffet or snack line while keeping sightlines open and leaving clearance for extraction canopies or service shelves above. The 300 mm length makes it a narrow module for filling residual gaps in a CounterSL run, or providing a defined parking or plating area between powered appliances.

The overall dimensions are 300 x 700 x 270 mm, with the full footprint available as working surface at 300 x 700 mm. That means no loss of usable top to raised rims or housings; the entire top plate can be used for trays, small equipment or mise en place. In a confined galley or front-cooking station, those numbers translate directly into planning: 300 mm of line length is easy to accommodate where a wider base cabinet would block circulation.

Construction is stainless steel 1.4301 (AISI 304) throughout. Using a single material grade across the body simplifies maintenance on board, as cleaners and procedures can be standardised across the CounterSL line and other 1.4301 fittings. It also avoids the mixed-material joins that are harder to keep clean under USPH-style inspection regimes, particularly where counters meet appliances or bulkheads.

The unit is described as a self-supporting closed construction. In practice this means the work table forms a stable module within a CounterSL or similar low-profile counter run without relying on adjacent furniture for structural support. For a shipyard or refit contractor, that simplifies installation because the module can be positioned, aligned and fixed on its own before surrounding cladding or built-in casework is completed.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction

This work table is the right choice where a designer needs a short 300 mm section of 700 mm-deep stainless surface at low height in a CounterSL line, for example as a neutral top between heated or cooled modules. It is less suited as a standalone main prep surface in a production galley, where a full-height table with greater depth and length will give more ergonomic working space. Ordered under MKN product number 10013345.