MKN Work Table 10018325 – Optima 700

Eight hundred by seven hundred millimetres of working surface at an 850 mm height defines the footprint and ergonomics of the MKN 10018325 work table. Built to the Optima 700 line dimensions, it fits directly into a 700 mm deep cooking suite or runs as a standalone work zone on the same grid.

On a vessel this size and height combination matters for both planning and day-to-day use. An 800 x 700 mm top is large enough for a chopping board, GN pans or a small appliance without blocking movement in a narrow galley corridor. The 850 mm working surface height gives a consistent plane with adjacent Optima 700 modules, so trays and pans can be slid across instead of lifted — a consideration when the ship is moving and heavy items have to be handled securely.

Structurally, the table uses stainless steel 1.4301 (AISI 304) throughout, which is the standard kitchen alloy for food preparation furniture. The self-supporting closed construction means the body carries its own load rather than relying on surrounding equipment or walls, so it can stand as an independent unit or form part of a continuous run. Net weight is 45 kg with a gross shipping weight of 54 kg, light enough to manoeuvre into position but substantial enough that it does not shift once fixed down on a marine plinth or flanged feet specified at project level.

Two height figures appear in the data and they serve different roles. The overall body is 700 mm high, while the working surface sits at 850 mm. In practice, this lets designers align the usable top with other 850 mm work surfaces while keeping the substructure compact and leaving space for services, coamings or low sills beneath. The 800 x 700 x 700 mm corpus dimension also simplifies drawing work, as it matches the Optima 700 modular depth, so sections can be repeated across the galley without custom fabrication.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction

This table is the right choice where an Optima 700 line needs added preparation or landing space on the same 700 mm depth, or where a standalone stainless work surface is required without bespoke fabrication. It is less suitable where undercounter storage, refrigeration or appliances are needed in the same footprint, because the closed, self-supporting body is not configured as a cabinet or equipment stand. Ordered under MKN product number 10018325.