MKN Work Table 1203604 – CounterSL

400 x 700 x 270 mm defines the footprint of the MKN 1203604 CounterSL work table, a low-height stainless module that drops into a serving or front-cooking line without dominating the sightline. With a net weight of 20 kg, it is light enough to handle during installation yet substantial once fixed in place on a marine foundation.

The 270 mm corpus height and 400 x 700 mm working surface make sense on a vessel where this table often sits in a counter run rather than in the back-of-house galley. In a buffet, bistro or snack outlet, equipment has to clear the bulkhead views and integrate with servery counters, and a low profile like this avoids clashing with glazing or overhead fittings. The compact 400 mm length is also a planning tool for designers trying to balance preparation space with refrigeration, drop-in units or heated wells on a short bulkhead.

The working surface itself is 400 x 700 x 150 mm, so most of the unit’s 270 mm height is usable stainless above the deck. That gives enough depth for a stable work zone while keeping the overall body low. The table accepts GN 1/1 containers, which lets it function as a landing and staging point for standard pans moving between kitchen and front-of-house. In a narrow service alley, being able to place a GN 1/1 directly on the worktop without a separate stand reduces both congestion and extra hardware.

Construction is in stainless steel 1.4301 (AISI 304) throughout. For a marine installation this matters because the same salt-laden air and aggressive cleaning routines used elsewhere in the galley also reach the front line; 1.4301 is a known quantity for these environments when correctly cleaned and maintained. Gross weight is 28 kg, so the packing and handling loads are modest and easy to route through provision doors.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction
• Accepts GN 1/1 containers

This CounterSL work table suits small counters or service points where 400 mm of length is all that can be spared, or where the designer needs a filler to complete a 700 mm-deep line while keeping storage below the counter for other uses. It is not the right choice where undercounter refrigeration or heated storage is required, because the self-supporting closed construction is a work surface only, not a cabinet appliance.

Ordered under MKN product number 1203604.