MKN Work Table 1303701 – HotLine

400 x 700 mm of working surface on a 700 mm-high body defines the footprint and working level of the MKN 1303701 HotLine work table. With a net weight of 25 kg, it is a compact module that can be positioned precisely where a short section of stainless worktop is needed in a marine galley line.

On board, a 400 mm-wide table earns its place between cooking or preparation appliances where a deeper or wider section would block movement or doors. The 400 x 700 mm working surface gives a defined landing, plating or transfer area in front of or beside HotLine elements while keeping the 700 mm overall depth consistent for planning and cleaning along the deck. Since the same 400 x 700 mm figures apply to the working surface and the listed L x W dimensions, drawings can be laid out without allowances for overhangs.

The table body measures 400 x 700 x 700 mm (L x W x H). This low height allows it to sit as an intermediate level in front of taller equipment or as a side surface where full bench height is not required. In tight galleys, that can clear sightlines across the cookline and leave room for service over the top. The 25 kg net weight, and 31 kg gross weight for transport, are low enough that bringing the unit aboard and manoeuvring it through passageways can be planned without special lifting gear, but still high enough to keep it stable once fixed on its foundation.

Construction is stainless steel 1.4301 (AISI 304) throughout. Using a single, known alloy simplifies maintenance and hygiene regimes, because cleaning agents and routines already proven on adjacent 1.4301 worktops apply here as well. The self-supporting closed construction noted in the specification means the table is a complete unit rather than a loose top on a separate frame, which helps when tying it mechanically into a HotLine block or into deck fixings.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction

This unit is the right choice where a designer needs a 400 mm-wide stainless work surface to complete a 700 mm-deep HotLine line, or to create a defined landing or plating area in a confined galley. It is the wrong choice where under-counter storage, refrigeration or equipment integration are required, because the specification covers only a closed, self-supporting table body without shelves, drawers or cut-outs.

Ordered under MKN product number 1303701 in the HotLine series.