MKN Work Table 1303705 – HotLine

Five hundred by seven hundred millimetres of working surface in a 700 mm high body gives this HotLine work table a compact footprint that still matches standard 700 mm deep cooking modules. At 36 kg net weight it is a solid stainless structure rather than a light add-on shelf, so it can be treated as part of the main galley line rather than a temporary stand.

On board, a 500 x 700 mm table is often the piece that closes a gap in a cookline run or creates a defined prep or plating area between appliances. The matching 700 mm depth means it can sit flush with other 700 mm bodies without steps that trap debris. That matters for cleaning in a marine galley, where any ledge or overhang quickly becomes a dirt and moisture trap. Its dimensions also keep deck loading predictable; a 36 kg table is heavy enough to feel fixed, but not so heavy that moving or repositioning it during a refit becomes a major lifting task.

The working surface is 500 x 700 mm, so it will take standard chopping boards, small equipment or mise-en-place without projecting beyond the line of adjacent units. Overall dimensions are 500 x 700 x 700 mm, so the working height comes from the full body, not from a thin top on a tall frame. For designers, that makes it straightforward to integrate in a run of 700 mm high elements when the requirement is a continuous working plane. Gross weight is quoted as 43 kg, which is the figure to use when checking freight and handling during loading.

Material specification is stainless steel 1.4301 (AISI 304) throughout. That means the same grade is used for the working surface and the structure, simplifying any future welding or modification work because there is no mix of unknown alloys. In a marine environment this consistency also helps when planning cleaning chemicals; the whole table can be treated as AISI 304.

Build and control

• Stainless steel 1.4301 (AISI 304) throughout
• Self-supporting closed construction

This table is the right choice where a 500 x 700 mm station is needed within a 700 mm deep HotLine or similar galley layout, and where stainless steel 1.4301 (AISI 304) is an accepted material standard. It is not the ideal part where larger preparation areas or different heights are required, because its 500 mm length and fixed 700 mm body height set clear limits on usable surface and ergonomics.

Ordered under MKN product number 1303705.