MKN Work Table 7NART040X

Article number 7NART040X sits in the project as a plain work table, but with one important structural detail: all seams are fully welded. On a vessel where deck washing is done with hose or spray, that weld pattern is what keeps moisture and soil from entering joints and accumulating in the substructure.

For a ship superintendent or galley designer, the value of a welded work table is less about appearance and more about cleaning time and inspection results. Open joints and spot-welded folds tend to trap food residues and salt, which are hard to reach once the table is installed tight to bulkheads or integrated into a cooking block. A table with fully welded seams presents continuous, smooth lines that can be wiped or sprayed down without chasing residues out of crevices. That helps when the galley has to be demonstrated clean under a structured hygiene regime.

With no cut-outs or integrated appliances specified in the data, the 7NART040X functions as a neutral surface for preparation, plating or equipment parking. In a marine galley layout, such neutral modules often bridge between cooking ranges and sinks or form landing areas next to heavy-use appliances. The welded construction makes it a candidate for those wet and high-traffic zones, because there are no mechanical joints at the edges to loosen under vibration. It can also be tied into surrounding stainless furniture so that the working line reads as a single hygienic plane rather than a collection of separate tables.

The fully welded seams influence how the table behaves over time. Under ship motion and repeated hot–cold cycles from pans and trays, bolted or spot-welded joints can develop small gaps. Those gaps are then difficult to seal in a way that satisfies marine hygiene inspections. By contrast, continuous welding along the seams fixes the geometry and removes that future failure point. It also simplifies routine visual checks: inspectors see uninterrupted stainless seams instead of junctions that have to be probed.

Build and control

• Fully welded seams

This work table is the right choice where hygiene and cleanability are prioritised, for example in preparation areas that are washed down frequently or where inspectors expect to see closed stainless construction. It is less suitable as a substitute for dedicated refrigerated or heated workstations, because no such functions are present in the specification and they would need to be provided by separate equipment. Ordered under MKN product number 7NART040X.