MKN Work Table 7NART060X

7NART060X is identified in the MKN programme as a dedicated work table with fully welded seams and radiused internal corners. That combination fixes how the surface behaves in a galley that is washed down frequently and inspected against tight hygiene standards.

On board, a work table is a structural part of the preparation zone, not loose furniture. Once welded or bolted into position, it becomes part of the stainless envelope that separates food preparation from the surrounding structure. A table like 7NART060X, with closed seams and shaped internal corners, reduces the number of joints where food debris and wash water can settle, which in turn simplifies cleaning routines for the crew.

Fully welded seams are the core of this construction. Instead of open junctions between plates and profiles, the welds close the gaps so there is no capillary path for liquid or grease to run into. In a marine galley where cleaning often relies on spray wands and chemical foams, that matters: water sheds off the surface rather than disappearing into crevices that are difficult to flush out. Over time, this limits staining along joints and keeps the work surface consistent for inspection.

Radiused internal corners are the second deliberate choice on 7NART060X. Sharp right angles are natural collection points for fine soil, especially where the deck is moving and cleaning has to be carried out quickly between services. A radius lets brushes and spray patterns work into the corner without leaving a shadow of residue, so staff can reach an acceptable standard with less mechanical effort. It also means that when the table is integrated into a longer run, the transitions at those corners are easier to wipe through.

Within an overall galley design, a table at this specification is usually detailed alongside cooking blocks, sinks and storage as part of a coherent stainless package. Using a work table with welded seams means fewer separate cover strips and infill pieces are needed to bridge between items, which can simplify both fabrication and installation at the yard. The article number 7NART060X provides a single reference for the drafter and the purchasing team when they are matching drawings to equipment lists.

Build and control

• Radiused internal corners for hygienic cleaning
• Fully welded seams

The 7NART060X is a strong fit where the layout is fixed, cleaning is aggressive, and the aim is to minimise dirt traps in preparation zones and side stations. It is the wrong choice where frequent reconfiguration of the workspace is expected, or where adjustable feet, under-shelf systems or integrated services are a primary requirement, because those elements are not defined in the available information for this specific work table.

Ordered under MKN product number 7NART060X.