MKN Work Table 7NART080X

7NART080X is identified throughout the MKN documentation as both the article number and the MKN code for this work table. That single reference point makes it straightforward to specify in a yard package, refit scope or spare-parts schedule.

In a shipboard galley, flat work space is used continuously for preparation, plating, setting down pans and holding equipment. Surfaces are exposed to moisture and aggressive detergents, and the inspection focus is on how easily they can be cleaned and kept free of soil. A table built with radiused internal corners and fully welded seams cuts down the number of joints and edges that crews have to work around during every cleaning cycle.

Fully welded seams on the 7NART080X mean the junctions between surfaces are closed by solid weld metal. There is no reliance on sealant lines or mechanical strip covers at those joins. For a superintendent or designer, that is one less interface that can open under vibration or repeated thermal cycling, and fewer linear metres of joint to monitor for sealant failure. Over time, that can have as much impact on man-hours spent cleaning as on direct hygiene performance, because crew do not have to detail-clean into open seams.

Radiused internal corners remove sharp interior angles from the construction. When a cloth or mop runs into a tight internal angle it tends to leave a line of residue; the radiused geometry on this table reduces that effect and lets cleaning tools follow the corner. On a vessel working to VSP-style construction expectations, that kind of corner treatment is often the difference between a surface that can be wiped to inspection standard in one pass and a surface that always needs extra work.

The table is catalogued simply as an MKN work table rather than as an appliance module, which makes it a neutral element in the layout. It can be used to extend a preparation run, bridge between sections of a cooking block, or provide a fixed landing area in a pot-wash zone without adding services, burners or controls to the space. Having the article number 7NART080X and MKN code 7NART080X aligned avoids confusion when that position is called up on drawings, purchase orders and class correspondence.

Build and control

• Radiused internal corners for hygienic cleaning
• Fully welded seams

This table is the right choice where the requirement is a fixed, hygienic work surface within an MKN-based galley and the priority is to minimise dirt-trapping joints and reduce cleaning effort. It is the wrong choice where the same footprint is expected to deliver under-counter storage, refrigeration or integrated cooking equipment, because this unit is focused purely on providing a cleanable worktop with radiused corners and welded seams. Ordered under MKN product number 7NART080X.