Electrolux Professional Dishwasher Zone Module 535130 – green&clean, Medium pre-wash zone for Dual Rinse Rack Type Dishwasher

7.37 kW of installed power and a 560 mm body width are the defining figures on the 535130 pre-wash zone module. It is the medium pre-wash section for green&clean dual-rinse rack-type dishwashers, built as a matching body rather than a generic add-on.

On a shipboard warewash line the pre-wash decides how much soil reaches the main wash tank. Moving this work into an enclosed 825 mm deep module helps stabilise detergent life and wash quality over a service, because soil is broken in a dedicated tank instead of on the primary wash jets. The module forms part of a fixed installation in the scullery, so once it is in place the line behaves as a single appliance in day-to-day operation.

The 535130 runs on a 400 V/3 ph/50 Hz supply. Default installed power is 7.37 kW, which must be added to the connected rack-type machine when the galley distribution board and breakers are specified. On a refit this number is often the constraint that decides whether a pre-wash can be added to an existing line without upgrading cabling. The vertical body height is 1785 mm; the 2030 mm shipping height is the more practical figure when planning how to route the packed unit through hatches and corridors.

Footprint and handling data land on the installation plan. External dimensions of 560 mm width and 825 mm depth define the extra deck length and side clearance required in the scullery bay. Net weight is 104 kg, with a shipping weight of 126 kg; both numbers matter to the yard or contractor arranging lifting and temporary supports when the crate is brought aboard. Shipping dimensions of 910 mm in width, 700 mm in depth and 2030 mm in height give a packed volume of 1.29 m³, which is the figure that appears in container and crane schedules. Noise is quoted at less than 62 dBA, so extending a line with this module does not change the acoustic expectation around the warewash area.

Build and control

• IP25 rated against water ingress
• Rounded internal corners for cleaning
• Adjustable feet

The 535130 is the right choice where a green&clean dual-rinse rack conveyor is consistently loaded, soil levels are high, and there is room on the deck and in the electrical schedule to accept an extra 560 mm of line and 7.37 kW of load. It is the wrong choice where scullery work is handled by hood-type or undercounter machines, or where an existing conveyor line already runs close to the limits of its available deck space or power and cannot realistically absorb another 7.37 kW without upstream electrical modifications. Ordered under Electrolux Professional product number (PNC) 535130.