Electrolux Professional Induction Top 589845 – thermaline 90, 4 Zone Induction Top on Oven, 1 Side H=700

Twenty-five kilowatts on a 1000 x 900 mm body gives the 589845 a dense induction load for its footprint. Four plates at 5 kW each mean the full rating is genuinely available across the top, rather than concentrated in one or two positions.

External height is 700 mm, so this thermaline 90 module sits as a freestanding body in a continuous cooking line rather than as a low plinth-built unit. Depth is 900 mm and operation is from one side, keeping both the controls and the quoted front access to components on the working aisle, which simplifies service when space between lines is tight. Net weight is 197 kg, so the shipyard needs to treat it as fixed plant when specifying deck pads and coamings rather than something to be moved for cleaning.

The induction top mirrors the chassis dimensions: 1000 mm wide and 900 mm deep, which avoids ledges or overhangs that trap soil between top and base. Each front plate and each back plate is 340 x 370 mm, so the cooking surface divides into four equal rectangles. For the galley this matters more than the abstract 25 kW figure, because it sets how many large pans can sit on the hob at once without compromising coil coverage.

Supply is specified at 440 V/3 ph/50/60 Hz. That allows the same unit to land on vessels built around either 50 or 60 Hz distributions while keeping the voltage at a marine 440 V level rather than a shore-only 400 V configuration. Current draw is 38.7 Amps at that rating, which is a single line item for the panel schedule and diversity calculation. Because this is an induction top on oven configuration under one 25 kW rating, there is no need to split loads between two separate appliances in the electrical design.

Build and control

• IPX5 rated against water ingress
• AISI 304 (1.4301) stainless steel construction
• Built to DIN 18860-2 with drop-nose worktop
• THERMODUL jointing for a seamless run of units
• Stainless steel internal frame
• Compliant with Swiss Energy Efficiency Ordinance 730.02
• Digital control display
• Overheat cut-out
• Standby mode for reduced idle consumption
• Front access to components for service
• Metal knobs with hygienic soft-touch grips

IPX5 protection aligns the unit with pressure-spray cleaning in a marine galley, so washdown can happen without exposing electrics to stray jets. The AISI 304 chassis and stainless internal frame let the module be coupled by THERMODUL to other thermaline 90 units, forming a single work surface without open joints where food and salt spray accumulate. Compliance with Swiss Energy Efficiency Ordinance 730.02 and the standby mode both contribute to holding down idle draw from a 25 kW rated position, which affects generator loading over long services.

This induction top is the right choice where a line requires four equal 340 x 370 mm zones at 5 kW each over an oven in a 1000 mm width on a 440 V/3 ph/50/60 Hz system. It is the wrong choice for galleys that must remain on gas-only cooking, or for electrical plans that cannot allocate a 25 kW, 38.7 Amp position on the distribution board without reworking feeders.

Ordered under Electrolux Professional product number 589845.