Electrolux Professional Induction Top 589852 – thermaline 90, 2 Zone Full Surface Induction Top on Open Base, 1 Side, H=700 - H3

Fourteen kilowatts of induction power in a 500 x 900 mm footprint defines the 589852 module. Each of the two full-surface zones is rated 7 kW, giving a compact but high-output top suited to a single line of service.

The supply is 440 V/3 ph/50/60 Hz, so this unit drops directly onto a standard marine switchboard without special transformers or non-standard feeds. At 700 mm body height and 900 mm depth, it lines up with other thermaline 90 marine modules, while the one-side-operated configuration matches a galley arranged along a bulkhead rather than an island. Net weight is 51 kg, which simplifies handling through narrow accesses during installation, but the deck foundation still needs to be prepared to the shipyard’s hygiene and stability details.

Induction changes the way heat lands in the galley envelope. Here, 14 kW are delivered only into ferromagnetic pans, not as a continuous radiant load into the room. For HVAC planning that means this module contributes less stray heat than an open radiant top of similar power, and IPX5 protection allows the surrounding deck and bulkhead to be cleaned with spray without isolating the unit. The 440 V/3 ph/50/60 Hz specification also matters for fans and pumps upstream on the same distribution, because the unit will behave consistently whether the vessel is on 50 Hz or 60 Hz generation.

Technically, the 589852 is a two-zone full-surface induction top on an open base, one-side operated. Each front and back plate is rated 7 – 0 kW, so power is fully variable across both 420 x 370 mm active areas. Total installed power is 14 kW at a quoted current consumption of 19 Amps, which should be confirmed in the panelboard calculation for diversity and breaker sizing. The induction top dimensions are 500 mm wide by 900 mm deep, matching the external dimensions, so there are no hidden overhangs to clash with adjacent modules. Below the hob, the open base offers a storage cavity 340 mm wide, 330 mm high and 740 mm deep, giving usable stowage for pans and utensils within the unit footprint.

Build and control

• IPX5 rated against water ingress
• AISI 304 (1.4301) stainless steel construction
• Built to DIN 18860-2 with drop-nose worktop
• THERMODUL jointing for a seamless run of units
• Stainless steel internal frame
• Compliant with Swiss Energy Efficiency Ordinance 730.02
• Digital control display
• Overheat cut-out
• Front access to components for service
• Metal knobs with hygienic soft-touch grips

This module is a strong fit where a galley needs high induction power in a 500 mm wide bay and values the open base for immediate storage. It is not the right choice where the requirement is pass-through or two-side operation, because this thermaline 90 marine configuration is one-side operated only. For longer lines, the THERMODUL joint lets it run cleanly into adjacent 900 mm deep modules without soil traps.

Ordered under Electrolux Professional product number 589852.