Electrolux Professional Induction Top 589930 – thermaline 90, 4 Zone Full Surface Induction Top, 1 Side, H=700 - H3

Twenty-eight kilowatts concentrated into four induction plates on a 1000 x 900 mm body defines the 589930 as a main-line cooking module, not a filler. Each plate is rated 7 kW, with matching 420 x 370 mm areas front and back, so any position on the top can carry the same duty.

The supply specification is 440 V/3 ph/60 Hz with a quoted current consumption of 39 Amps. That aligns with typical marine distribution and lets the electrical design team allocate a dedicated breaker and cabling without adapting a shore-side voltage or frequency. One-side operation and a 700 mm external height match the thermaline 90 marine geometry, so this top sits cleanly in a straight run of equipment on the galley plan.

From a galley perspective, what matters is how much work fits into the deck area and how predictable that work is. Here, a 1000 mm width and 900 mm depth provide four identical 7 kW plates. Both front plates are 420 x 370 mm and both back plates are 420 x 370 mm, so there is no “strong corner” that distorts the cooking pattern; any of the four positions can take the same pan and the same load. At 150 kg net weight the unit has enough mass to integrate firmly with a plinth or leg frame without feeling light or flexible once it is fixed to the deck.

Construction is in AISI 304 (1.4301) stainless steel with a stainless steel internal frame, so the chassis and skin share the same material class. The induction top is built to DIN 18860-2 with a drop-nose worktop, which gives the galley designer a defined edge profile and allows other thermaline 90 modules to butt up using the same standard geometry. IPX6 protection against water ingress is specified, which supports high-pressure spray cleaning on the cooking line rather than relying on cloth-only regimes. An overheat cut-out provides a defined response if pans are misused or the top is run hard in service.

Build and control

• IPX6 rated against water ingress
• AISI 304 (1.4301) stainless steel construction
• Built to DIN 18860-2 with drop-nose worktop
• Stainless steel internal frame
• Compliant with Swiss Energy Efficiency Ordinance 730.02
• Overheat cut-out
• Front access to components for service
• Metal knobs with hygienic soft-touch grips

Front access to components matters on a marine installation where the top is tied into adjacent modules and a sealed plinth; being able to service from the operator side reduces disturbance to deck sealing and surrounding units. Compliance with Swiss Energy Efficiency Ordinance 730.02 ties this module into a defined regulatory framework, which can be relevant where the vessel’s flag or owner specifies that standard across the galley.

This module is the right choice where the requirement is a one-side operated thermaline 90 induction section delivering four equal 7 kW plates in a 1000 x 900 mm footprint at 440 V/3 ph/60 Hz. It is the wrong choice for a compact galley that cannot release a 1000 mm slot on the main line, or for a project that needs two-side access on an island cooking block. Ordered under Electrolux Professional product number 589930.