Electrolux Professional Solid Top Range 589876 – thermaline 90, 2 Zone Freestanding Electric Solid Top with Ecotop, 1 Side, H=700 - H3

Six kilowatts on a 500 mm wide body gives the 589876 a concentrated footprint for a main galley line. The solid top offers a 360 × 730 mm usable surface split into two Ecotop zones, with each plate quoted at 3–0 kW, so both front and back can be driven independently within the overall load.

On a shipboard installation the 440 V/3 ph/50/60 Hz supply aligns with typical marine switchboard practice, which simplifies integration into an existing 440 V distribution rather than forcing a dedicated transformer. Current consumption is 11.8 Amps, a modest draw for a cooking position and one that eases panelboard loading compared with higher-power modules. The one-side operated configuration suits the in-line galley layouts common on workboats and merchant vessels where access is from the service side only.

The working temperature band is 100 to 450 °C. That range allows the Ecotop to hold low settings for gentle simmering and then step up to high surface temperatures where fast searing is needed. Because both the front and back plates carry 3–0 kW ratings, a designer can plan for mixed-duty operation on one module without overloading the electrical feed. The Ecotop surface is sized at 360 mm in width by 730 mm in depth, so pans can sit front to back with access to two heat zones on a single plate.

Externally, the unit measures 500 × 900 × 700 mm (width, depth, height). At 900 mm depth, it matches the thermaline 90 line and will join adjacent modules through the THERMODUL system into a sealed run, so soil and liquid do not penetrate between appliances even when the deck is washed down. The 700 mm body height identifies it as a freestanding base, giving storage volume under the top: the cavity measures 340 mm in width, 330 mm in height and 740 mm in depth. Net weight is 98 kg, which is relevant when the yard is detailing the deck reinforcement or when wall or plinth mounting is considered.

Build and control

• IPX5 rated against water ingress
• AISI 304 (1.4301) stainless steel construction
• Built to DIN 18860-2 with drop-nose worktop
• THERMODUL jointing for a seamless run of units
• Stainless steel internal frame
• Digital control display
• Overheat cut-out
• Standby mode for reduced idle consumption
• Front access to components for service
• Metal knobs with hygienic soft-touch grips

IPX5 protection allows routine cleaning with spray without water ingress into the electrical compartment, which is a significant point aboard where galleys are often cleaned with hoses at the end of a watch. AISI 304 (1.4301) construction and the stainless steel internal frame support long service life in a moist, salt-laden environment, while the DIN 18860-2 drop-nose worktop geometry lets this module align cleanly with other thermaline 90 components on a shared plinth. The digital control display and standby mode give the watchkeeper clear feedback while limiting idle energy draw between services.

This is the right choice where a compact, two-zone solid top is needed on a 500 mm module and the galley has a 440 V/3 ph supply available. It is not the best fit where very high pan counts must be handled on one appliance body; in that case larger thermaline 90 solid tops with greater usable surface area should be considered. Ordered under Electrolux Professional product number 589876.