MKN Refrigeration Unit 10027133

4.5 kW of connected load on a 400 V supply in a body just 570 x 590 x 518 mm sets the scale of the MKN refrigeration unit 10027133. The working surface is 568 x 359 mm, so this is a compact, single-zone module rather than a large remote plant.

For a shipboard galley, that footprint matters as much as the power rating. At 570 mm length and 590 mm width, the unit can be planned into tight runs of counters or a small preparation corner without blocking access routes or service shafts. The 518 mm height keeps it under typical worktop levels, leaving space above for a counter surface or other equipment, which is often the only way to add refrigeration capacity once a vessel is in service.

The electrical specification is straightforward: 400 V and 4.5 kW. That suits vessels where the galley distribution is already set up for a 400 V three-phase grid and allows the refrigeration module to be factored cleanly into the load calculation. On a ship where spare capacity on the switchboard is limited, the 4.5 kW figure is what the electrical engineer will check against existing breakers and cable runs before approving the position.

The technical layout is built around a single work zone. One work zone simplifies temperature control and operation, because the whole 568 x 359 mm working surface can be used for one dedicated task rather than juggling multiple independent areas. In practical terms, that surface size can take standard containers or trays laid out in a single row, and the rectangular 570 x 590 mm footprint leaves clear edges for sealing to adjacent units in a hygienic run. Net weight is 61 kg, with a gross shipping weight of 77 kg, so the structural loading is modest and the unit can usually be handled with standard galley installation gear without requiring special lifting arrangements.

Build and control

• Single work zone for focused temperature control across the full surface
• Working surface 568 x 359 mm within a 570 x 590 x 518 mm body for compact integration
• 400 V electrical supply for straightforward galley distribution planning
• 4.5 kW connected load suitable for moderate-capacity applications
• Net weight 61 kg, gross weight 77 kg for manageable handling and installation

This unit is a sensible choice where a galley or servery needs one clearly defined refrigerated work zone in a confined space, and where the electrical infrastructure already provides 400 V to the area. It is less suitable where multiple independently controlled refrigerated sections are required in the same footprint, or where the vessel’s distribution is standardised on a different voltage and cannot be adapted.

Ordered under MKN product number 10027133.