Professional Galley Equipment for Marine & Aviation

Hoshizaki Cube Ice Maker IM-130WPE-23 – Self-Contained, Water-cooled, 99 kg/24h, M Cube

The Hoshizaki IM-130WPE-23 makes 99 kg of cubes a day (self-contained, water-cooled, 50 kg bin). Data, manuals and marine quotation.

ManufacturerHoshizaki
ModelIM-130WPE-23
Product typeCube Ice Maker
SeriesIM Cube
ConfigurationSelf-Contained

Hoshizaki Cube Ice Maker IM-130WPE-23 Overview

With 99 kg of cubes a day and a 50 kg storage bin, the IM-130WPE-23 is a self-contained water-cooled cube machine for bars, pantries and small galleys. Averaged out, the machine turns out about 4.1 kg an hour. An empty 50 kg bin fills in roughly 12 hours at that rate.

Related models

As the Basic Cube version of the IM-130WPE, this machine comes with no drain pump and no UV-C unit. Cube size on the IM-130WPE-23 is M (28 x 28 x 23 mm), marked by the -23 in the code. The same machine also comes as IM-130WPE-U-23 (UltraCUBE), IM-130WPE-F-23 (FlexiCUBE) and IM-130WPE-E-23 (EliteCUBE). With a different cube it is the IM-130WPE (L cube, 108 kg a day). The air-cooled twin is the IM-130PE-23: 110 kg a day, using 570 liters of water a day against 600 liters here and putting 1.45 kW of heat into the room instead of 1.02 kW.

Power, water and size

It measures 704 x 506 x 1,210 mm (W x D x H) before legs (add 70-110mm) and weighs 71 kg empty. Power draw is 0.525 kW on single-phase 220-240 V 50 Hz, within ±6%, on a 5 A breaker. Heat released into the room is 1.02 kW at 32 °C ambient. Water consumption comes to 600 liters per 24 hours, or roughly 6.1 liters for every kilo of ice. Inside the IM-130WPE-23 is a 147 g R290 charge, and R290 is propane rated A3 for flammability. On the control side the IM-130WPE-23 gives you automated cleaning.

Where the IM-130WPE-23 fits

The IM-130WPE-23 is rated for rooms at 1 to 40 °C, with feed water between 5 and 35 °C at 0.7 to 8 bar. Water cooling keeps most of the heat out of the room, at the cost of about 600 liters a day from the tanks or watermaker. For water treatment, fit the 4HC-H single filter ahead of the IM-130WPE-23. Before quoting we check the board voltage and frequency, the water connection and the fixing on board, since the figures above are for the standard IM-130WPE-23.

Key features of the IM-130WPE-23

  • 99 kg of cubes per 24 hours
  • 50 kg built-in storage bin
  • Water-cooled condenser
  • R290 refrigerant
  • Exterior: Stainless steel AISI 441, Galvanized steel (Rear)
  • Automated cleaning
  • Accessories included: Installation kit, Legs, Scoop

IM-130WPE-23 technical specifications

ManufacturerHoshizaki
ModelIM-130WPE-23
Product typeCube Ice Maker
SeriesIM Cube
ConfigurationSelf-Contained
Manufacturer item numberM115-D005
Country of originUK
Accessories includedInstallation kit, Legs, Scoop
Compatible water filters4HC-H Single Water Filter, 4HC Replacement Cartridge
Width704 mm
Width (packed)805 mm
Depth506 mm
Depth (packed)580 mm
Height1210 mm
Height (packed)1375 mm
Volume (packed)0.642 m³
Legsfor legs add 70-110mm
Electrical consumption0.525 kW
Ambient temperature (maximum)40 °C
Ambient temperature (minimum)1 °C
Voltage tolerance±6%
Water supply pressure (maximum)0.8MPa (8 bar)
Water supply pressure (minimum)0.07MPa (0.7 bar)
Water supply temperature (maximum)35 °C
Water supply temperature (minimum)5 °C
FunctionsAutomated cleaning
Electrical circuit breaker protection5 A
ExteriorStainless steel AISI 441, Galvanized steel (Rear)
Gross weight83 kg
Net weight71 kg
Heat rejection (AT 32 °C, WT 21 °C)1.02 kW
Power supply1/220 - 240V/50Hz
Storage bin capacity50 kg
Cooling systemWater Cooled
Ice typeMedium cubes - 23
Ice production (kg/24h)99 kg
Water consumption incl. condenser (m³/24h)0.6 m³
CO2 equivalent0.441 kg
GWP3 GWP
Refrigerant charge147 g
Refrigerant typeR290
NoteThis type of icemaker is on special order only. Please take longer lead times into consideration.

Also listed under

Questions about the IM-130WPE-23

How much ice does the IM-130WPE-23 make per day?

Up to 99 kg of cubes in 24 hours, about 4.1 kg an hour. Real output drops as room and water temperatures rise.

How is the IM-130WPE-23 cooled?

It is water-cooled. The air-cooled version is the IM-130PE-23.

What water supply does the IM-130WPE-23 need?

Water at 5 to 35 °C and 0.7 to 8 bar, with the 4HC-H single filter system.

Where the IM-130WPE-23 is used

Marine Galley Equipment Ship Galley Equipment Yacht Galley Equipment Commercial Vessel Galley Equipment Offshore Galley Equipment

Hoshizaki, manufacturer of the IM-130WPE-23

Hoshizaki: Japanese maker of commercial ice machines, supplied through Hoshizaki Europe with cube, crescent, flake, nugget, cylinder and ball ice makers, ice and water dispensers and sushi display cases. Configured to order — tell us the vessel and the supply voltage and frequency, and we will quote the correct build.

All Hoshizaki equipment

Manuals and documents for the IM-130WPE-23

Documents are published by the manufacturer for the standard model. We confirm the build, supply and installation details for your vessel with the quotation.

Similar Cube Ice Makers

Get pricing for the Hoshizaki Cube Ice Maker IM-130WPE-23 – Self-Contained, Water-cooled, 99 kg/24h, M Cube

Add it to your quote basket with anything else you need, or request a quotation for this item alone.

Request a Quote