Professional Galley Equipment for Marine & Aviation

Hoshizaki Cube Ice Maker IM-240DPE-23 – Modular & Stackable, Air-cooled, 180 kg/24h, M Cube

The Hoshizaki IM-240DPE-23 makes 180 kg of cubes a day (modular & stackable, air-cooled). Data, manuals and marine quotation.

ManufacturerHoshizaki
ModelIM-240DPE-23
Product typeCube Ice Maker
SeriesIM Cube
ConfigurationModular & Stackable

Hoshizaki Cube Ice Maker IM-240DPE-23 Overview

Hoshizaki rates the modular IM-240DPE-23 at 180 kg of cubes per 24 hours, and you pair it with a storage bin sized to the ice needed at the start of service (Hoshizaki lists the B-340SB). Spread over a day, it is about 7.5 kg per hour.

Which IM-240DPE to pick

This 180 kg/day machine is the Basic Cube build, so it has no drain pump and no UV-C unit. The IM-240DPE-23 makes the M cube, 28 x 28 x 23 mm, marked by the -23 in the code. The same machine also comes as IM-240DPE-U-23 (UltraCUBE). With a different cube it is the IM-240DPE-32 (XL cube, 190 kg a day) and IM-240DPE (L cube, 210 kg a day). Compare it with the water-cooled IM-240DWPE-23, which makes 190 kg a day, using 980 liters of water a day against 730 liters here and putting 1.47 kW of heat into the room instead of 2.25 kW.

Technical details

It measures 1,084 x 700 x 500 mm (W x D x H) and weighs 75 kg empty. Electrically it needs single-phase 220-240 V 50 Hz, drawing 0.87 kW, within ±6%, on a 5 A breaker. Heat released into the room is 2.25 kW at 32 °C ambient. Water consumption comes to 730 liters per 24 hours, or roughly 4.1 liters for every kilo of ice. The IM-240DPE-23 runs on 147 g of R290, which is propane (safety class A3), so the charge belongs on the installation paperwork. On the control side the IM-240DPE-23 gives you automated cleaning.

Fitting it on a vessel

Keep the room around the IM-240DPE-23 between 1 and 40 °C and the incoming water between 5 and 35 °C at 0.7 to 8 bar. The condenser blows about 2.25 kW of warm air into the room, which a bar with poor ventilation will notice. Pair it with a 4HC-H twin filter; at 180 kg a day that is the size Hoshizaki specifies. Top kits Hoshizaki lists for the IM-240DPE-23: TK-48 for B-340SB (optional, not required), TK-IMD2 for B-340SB. Send us the supply details and where the IM-240DPE-23 will stand and we will confirm the rest with Hoshizaki.

Key features of the IM-240DPE-23

  • 180 kg of cubes per 24 hours
  • Air-cooled condenser
  • R290 refrigerant
  • Exterior: Stainless steel AISI 441, Galvanized steel (Rear)
  • Automated cleaning
  • Accessories included: brace, Installation kit, Scoop
  • Compatible bins: B-340SB

IM-240DPE-23 technical specifications

ManufacturerHoshizaki
ModelIM-240DPE-23
Product typeCube Ice Maker
SeriesIM Cube
ConfigurationModular & Stackable
Manufacturer item numberM120-D002
Country of originUK
Accessories includedbrace, Installation kit, Scoop
Compatible water filters4HC-H Twin Water Filter, 4HC Replacement Cartridge
Width1084 mm
Width (packed)1196 mm
Depth700 mm
Depth (packed)825 mm
Height500 mm
Height (packed)640 mm
Volume (packed)0.6315 m³
Electrical consumption0.87 kW
Ambient temperature (maximum)40 °C
Ambient temperature (minimum)1 °C
Voltage tolerance±6%
Water supply pressure (maximum)0.8MPa (8 bar)
Water supply pressure (minimum)0.07MPa (0.7 bar)
Water supply temperature (maximum)35 °C
Water supply temperature (minimum)5 °C
FunctionsAutomated cleaning
Electrical circuit breaker protection5 A
ExteriorStainless steel AISI 441, Galvanized steel (Rear)
Gross weight87 kg
Net weight75 kg
Heat rejection (AT 32 °C, WT 21 °C)2.25 kW
Power supply1/220 - 240V/50Hz
Cooling systemAir Cooled
Ice typeMedium cubes - 23
Ice production (kg/24h)180 kg
Water consumption (m³/24h)0.73 m³
Compatible storage binsB-340SB
CO2 equivalent0.441 kg
GWP3 GWP
Refrigerant charge147 g
Refrigerant typeR290
Top kitsTK-48 for B-340SB (optional, not required), TK-IMD2 for B-340SB

Also listed under

Questions about the IM-240DPE-23

What is the daily output of the Hoshizaki IM-240DPE-23?

Up to 180 kg of cubes in 24 hours, about 7.5 kg an hour. Real output drops as room and water temperatures rise.

Is the IM-240DPE-23 air-cooled or water-cooled?

It is air-cooled. The water-cooled version is the IM-240DWPE-23.

What water supply does the IM-240DPE-23 need?

Water at 5 to 35 °C and 0.7 to 8 bar, with the 4HC-H twin filter system.

Where the IM-240DPE-23 is used

Marine Galley Equipment Ship Galley Equipment Yacht Galley Equipment Commercial Vessel Galley Equipment Offshore Galley Equipment

Hoshizaki, manufacturer of the IM-240DPE-23

Hoshizaki: Japanese maker of commercial ice machines, supplied through Hoshizaki Europe with cube, crescent, flake, nugget, cylinder and ball ice makers, ice and water dispensers and sushi display cases. Configured to order — tell us the vessel and the supply voltage and frequency, and we will quote the correct build.

All Hoshizaki equipment

Manuals and documents for the IM-240DPE-23

Documents are published by the manufacturer for the standard model. We confirm the build, supply and installation details for your vessel with the quotation.

Similar Cube Ice Makers

Get pricing for the Hoshizaki Cube Ice Maker IM-240DPE-23 – Modular & Stackable, Air-cooled, 180 kg/24h, M Cube

Add it to your quote basket with anything else you need, or request a quotation for this item alone.

Request a Quote