Professional Galley Equipment for Marine & Aviation

Hoshizaki Cube Ice Maker IM-240XPE-23 – Modular & Stackable Extension, Air-cooled, 180 kg/24h, M Cube

The Hoshizaki IM-240XPE-23 makes 180 kg of cubes a day (modular & stackable, air-cooled). Data, manuals and marine quotation.

ManufacturerHoshizaki
ModelIM-240XPE-23
Product typeCube Ice Maker
SeriesIM Cube
ConfigurationModular & Stackable (extension unit)

Hoshizaki Cube Ice Maker IM-240XPE-23 Overview

Up to 180 kg of cubes a day from a air-cooled head that sits on a separate bin: the IM-240XPE-23 is built for ice rooms and busy bars rather than a counter. Hoshizaki pairs the IM-240XPE-23 with the B-340SA. This is the extension unit: it stacks on a base unit of the same series and adds its output over one bin. That works out to roughly 7.5 kg an hour.

Versions and cube size

In the IM CUBE family the IM-240XPE-23 is the Basic Cube, which means no drain pump and no UV-C unit. Each cube from the IM-240XPE-23 is 28 x 28 x 23 mm (size M), marked by the -23 in the code. Other versions of this model: IM-240XPE-U-23 (UltraCUBE). With a different cube it is the IM-240XPE-32 (XL cube, 190 kg a day) and IM-240XPE (L cube, 210 kg a day). There is also a water-cooled version, the IM-240XWPE-23, rated at 190 kg a day, using 980 liters of water a day against 730 liters here and putting 1.47 kW of heat into the room instead of 2.25 kW.

Power, water and size

The cabinet is 1,084 mm wide, 700 mm deep and 500 mm tall, and weighs 71 kg. It draws 0.87 kW from a single-phase 220-240 V 50 Hz supply, within ±6%, on a 5 A breaker. At 32 °C room temperature it releases 2.25 kW of heat. Daily water use is 730 liters, or roughly 4.1 liters for every kilo of ice. Inside the IM-240XPE-23 is a 147 g R290 charge, and R290 is propane rated A3 for flammability. Hoshizaki lists automated cleaning for the IM-240XPE-23.

Fitting it on a vessel

Check two things on board before the IM-240XPE-23 goes in: room temperature (1 to 40 °C allowed) and water pressure (0.7 to 8 bar, water 5 to 35 °C). Expect roughly 2.25 kW of extra heat in the room from this air-cooled unit. Pair it with a 4HC-H twin filter; at 180 kg a day that is the size Hoshizaki specifies. Top kits Hoshizaki lists for the IM-240XPE-23: TK-48 for B-340SA (optional, not required), TK-IMD2 for B-340SA. Send us the supply details and where the IM-240XPE-23 will stand and we will confirm the rest with Hoshizaki.

Key features of the IM-240XPE-23

  • 180 kg of cubes per 24 hours
  • Air-cooled condenser
  • R290 refrigerant
  • Exterior: Stainless steel AISI 441, Galvanized steel (Rear)
  • Automated cleaning
  • Accessories included: brace, Installation kit, Scoop
  • Compatible bins: B-340SA

IM-240XPE-23 technical specifications

ManufacturerHoshizaki
ModelIM-240XPE-23
Product typeCube Ice Maker
SeriesIM Cube
ConfigurationModular & Stackable (extension unit)
Manufacturer item numberM120-D004
Country of originUK
Accessories includedbrace, Installation kit, Scoop
Accessories includedbrace, Installation kit, Scoop
Accessories includedbrace, Installation kit, Scoop
Compatible water filters4HC-H Twin Water Filter, 4HC Replacement Cartridge
Width1084 mm
Width (packed)1196 mm
Depth700 mm
Depth (packed)825 mm
Height500 mm
Height (packed)640 mm
Volume (packed)0.631 l
Electrical consumption0.87 kW
Ambient temperature (maximum)40 u00b0C
Ambient temperature (minimum)1 u00b0C
Voltage toleranceRated Voltage ±6%
Water supply pressure (maximum)0.8MPa (8 bar)
Water supply pressure (minimum)0.07MPa (0.7 bar)
Water supply temperature (maximum)35 u00b0C
Water supply temperature (minimum)5 u00b0C
FunctionsAutomated cleaning
Electrical circuit breaker protection5 A
ExteriorStainless steel AISI 441, Galvanized steel (Rear)
Gross weight84 kg
Heat rejection (AT 32 °C, WT 21 °C)2.25 kW
Net weight71 kg
Power supply1/220 - 240V/50Hz
Cooling systemAir Cooled
Ice typeMedium cubes - 23
Ice production (kg/24h)180 kg
Water consumption (m³/24h)0.73 m³
Optional Extras4HC-H water filtration, UV-C sanitization kit, compatibility kit for stacking combinations including new and previous N series ice makers.
Compatible storage binsB-340SA
CO2 equivalent0.441 kg
Refrigerant charge147 g
Refrigerant typeR290
Top kitsTK-48 for B-340SA (optional, not required), TK-IMD2 for B-340SA

Also listed under

Questions about the IM-240XPE-23

What is the daily output of the Hoshizaki IM-240XPE-23?

Up to 180 kg of cubes in 24 hours, about 7.5 kg an hour. Real output drops as room and water temperatures rise.

Is the IM-240XPE-23 air-cooled or water-cooled?

It is air-cooled. The water-cooled version is the IM-240XWPE-23.

What water supply does the IM-240XPE-23 need?

Water at 5 to 35 °C and 0.7 to 8 bar, with the 4HC-H twin filter system.

Where the IM-240XPE-23 is used

Marine Galley Equipment Ship Galley Equipment Yacht Galley Equipment Commercial Vessel Galley Equipment Offshore Galley Equipment

Hoshizaki, manufacturer of the IM-240XPE-23

Hoshizaki: Japanese maker of commercial ice machines, supplied through Hoshizaki Europe with cube, crescent, flake, nugget, cylinder and ball ice makers, ice and water dispensers and sushi display cases. Configured to order — tell us the vessel and the supply voltage and frequency, and we will quote the correct build.

All Hoshizaki equipment

Manuals and documents for the IM-240XPE-23

Documents are published by the manufacturer for the standard model. We confirm the build, supply and installation details for your vessel with the quotation.

Similar Cube Ice Makers

Get pricing for the Hoshizaki Cube Ice Maker IM-240XPE-23 – Modular & Stackable Extension, Air-cooled, 180 kg/24h, M Cube

Add it to your quote basket with anything else you need, or request a quotation for this item alone.

Request a Quote