Professional Galley Equipment for Marine & Aviation

Hoshizaki Cube Ice Maker IM-45WPE-E-25 – Self-Contained, Water-cooled, 47 kg/24h, S Cube

47 kg/24h cube ice from the Hoshizaki IM-45WPE-E-25, a self-contained water-cooled unit with a 18 kg bin. Full specs and manuals.

ManufacturerHoshizaki
ModelIM-45WPE-E-25
Product typeCube Ice Maker
SeriesIM EliteCUBE
ConfigurationSelf-Contained

Hoshizaki Cube Ice Maker IM-45WPE-E-25 Overview

With 47 kg of cubes a day and a 18 kg storage bin, the IM-45WPE-E-25 is a self-contained water-cooled cube machine for bars, pantries and small galleys. That works out to roughly 2 kg an hour. From empty, its 18 kg bin takes about 9.2 hours to fill.

Related models

The version suffix tells you what is inside: the IM-45WPE-E-25 is the EliteCUBE and comes with both the drain pump and UV-C sanitization. Drain position stops being a problem: the IM-45WPE-E-25 pumps its waste water up to 1.5 m high and 10 m away. In the IM-45WPE-E-25 the UV-C unit works on the tank water between regular cleanings. The IM-45WPE-E-25 makes the S cube, 25 x 25 x 23 mm, marked by the -25 in the code. The same machine also comes as IM-45WPE-25 (Basic Cube), IM-45WPE-U-25 (UltraCUBE) and IM-45WPE-F-25 (FlexiCUBE). Need a different cube? Look at the IM-45WPE-E (L cube, 50 kg a day). Compare it with the air-cooled IM-45PE-E-25, which makes 43 kg a day, using 220 liters of water a day against 260 liters here and putting 0.71 kW of heat into the room instead of 0.44 kW.

In numbers

The cabinet is 503 mm wide, 456 mm deep and 840 mm tall before legs (add 90-125 mm), and weighs 46 kg. It draws 0.22 kW from a single-phase 220-240 V 50 Hz supply, within ±6%, on a 5 A breaker. Heat released into the room is 0.44 kW at 32 °C ambient. Water consumption comes to 260 liters per 24 hours, or roughly 5.5 liters for every kilo of ice. Its refrigerant is R290 (propane, class A3), 90 g of it, which matters when you decide where the IM-45WPE-E-25 goes. On the control side the IM-45WPE-E-25 gives you automated cleaning, UV-C sanitization and internal drain pump.

On board

The IM-45WPE-E-25 is rated for rooms at 1 to 40 °C, with feed water between 5 and 35 °C at 0.7 to 8 bar. The water-cooled condenser suits tight, badly ventilated spaces, but the IM-45WPE-E-25 needs a steady supply of cooling water, around 260 liters a day in total. The matching water filter for 47 kg a day is the 4HC-H single system. Supply, water and fixing for the IM-45WPE-E-25 are confirmed per vessel when we quote, since the figures above describe Hoshizaki's standard build.

Key features of the IM-45WPE-E-25

  • EliteCUBE version with drain pump and UV-C sanitization
  • 47 kg of cubes per 24 hours
  • 18 kg built-in storage bin
  • Water-cooled condenser
  • R290 refrigerant
  • Exterior: Stainless steel AISI 441, Galvanized steel (Rear)
  • Automated cleaning, UV-C sanitization + Internal drain pump
  • Accessories included: Installation kit, Legs, Scoop

IM-45WPE-E-25 technical specifications

ManufacturerHoshizaki
ModelIM-45WPE-E-25
Product typeCube Ice Maker
SeriesIM EliteCUBE
ConfigurationSelf-Contained
Manufacturer item numberM111-D303
Country of originUK
Accessories includedInstallation kit, Legs, Scoop
Compatible water filters4HC-H Single Water Filter, 4HC Replacement Cartridge
Width503 mm
Width (packed)635 mm
Depth456 mm
Depth (packed)520 mm
Height840 mm
Height (packed)1007 mm
Volume (packed)0.3325 m³
Legsfor legs add 90-125 mm
Electrical consumption0.22 kW
Ambient temperature (maximum)40 °C
Ambient temperature (minimum)1 °C
Voltage tolerance±6%
Water supply pressure (maximum)0.8MPa (8 bar)
Water supply pressure (minimum)0.07MPa (0.7 bar)
Water supply temperature (maximum)35 °C
Water supply temperature (minimum)5 °C
FunctionsAutomated cleaning, UV-C sanitization + Internal drain pump
Electrical circuit breaker protection5 A
ExteriorStainless steel AISI 441, Galvanized steel (Rear)
Gross weight54 kg
Net weight46 kg
Heat rejection (AT 32 °C, WT 21 °C)0.44 kW
Power supply1/220 - 240V/50Hz
Storage bin capacity18 kg
Cooling systemWater Cooled
Ice typeSmall cubes - 25
Ice production (kg/24h)47 kg
Water consumption incl. condenser (m³/24h)0.26 m³
CO2 equivalent0.27 kg
GWP3 GWP
Refrigerant charge90 g
Refrigerant typeR290
NoteThis type of icemaker is on special order only. Please take longer lead times into consideration.

Also listed under

Questions about the IM-45WPE-E-25

How much ice does the IM-45WPE-E-25 make per day?

Up to 47 kg of cubes in 24 hours, about 2 kg an hour. Real output drops as room and water temperatures rise.

Is the IM-45WPE-E-25 air-cooled or water-cooled?

It is water-cooled. The air-cooled version is the IM-45PE-E-25.

What water supply does the IM-45WPE-E-25 need?

Water at 5 to 35 °C and 0.7 to 8 bar, with the 4HC-H single filter system.

Where the IM-45WPE-E-25 is used

Marine Galley Equipment Ship Galley Equipment Yacht Galley Equipment Boat Galley Equipment Commercial Vessel Galley Equipment Offshore Galley Equipment

Hoshizaki, manufacturer of the IM-45WPE-E-25

Hoshizaki: Japanese maker of commercial ice machines, supplied through Hoshizaki Europe with cube, crescent, flake, nugget, cylinder and ball ice makers, ice and water dispensers and sushi display cases. Configured to order — tell us the vessel and the supply voltage and frequency, and we will quote the correct build.

All Hoshizaki equipment

Manuals and documents for the IM-45WPE-E-25

Documents are published by the manufacturer for the standard model. We confirm the build, supply and installation details for your vessel with the quotation.

Similar Cube Ice Makers

Get pricing for the Hoshizaki Cube Ice Maker IM-45WPE-E-25 – Self-Contained, Water-cooled, 47 kg/24h, S Cube

Add it to your quote basket with anything else you need, or request a quotation for this item alone.

Request a Quote