Professional Galley Equipment for Marine & Aviation

Hoshizaki Cube Ice Maker IM-65WPE-E-25 – Self-Contained, Water-cooled, 54 kg/24h, S Cube

Hoshizaki IM-65WPE-E-25: self-contained water-cooled cube ice maker, 54 kg a day with a 26 kg bin. Specs, manuals and quotes for ships and yachts.

ManufacturerHoshizaki
ModelIM-65WPE-E-25
Product typeCube Ice Maker
SeriesIM EliteCUBE
ConfigurationSelf-Contained

Hoshizaki Cube Ice Maker IM-65WPE-E-25 Overview

With 54 kg of cubes a day and a 26 kg storage bin, the IM-65WPE-E-25 is a self-contained water-cooled cube machine for bars, pantries and small galleys. Spread over a day, it is about 2.2 kg per hour. At that rate the 26 kg bin takes around 12 hours to rebuild after a busy service.

Which IM-65WPE to pick

In the IM CUBE family the IM-65WPE-E-25 is the EliteCUBE, which means both the drain pump and UV-C sanitization. The pump in the IM-65WPE-E-25 pushes waste water up to 10 m sideways and 1.5 m up, which helps on a ship where the deck drain is rarely next to the bar. The UV-C lamp keeps the standing water in the tank treated between cleanings of this 54 kg/day machine. Each cube from the IM-65WPE-E-25 is 25 x 25 x 23 mm (size S), marked by the -25 in the code. If the version does not suit, the same body is sold as IM-65WPE-25 (Basic Cube), IM-65WPE-U-25 (UltraCUBE) and IM-65WPE-F-25 (FlexiCUBE). Other cube sizes: IM-65WPE-E (L cube, 62 kg a day). There is also a air-cooled version, the IM-65PE-E-25, rated at 56 kg a day, using 220 liters of water a day against 430 liters here and putting 0.83 kW of heat into the room instead of 0.43 kW.

In numbers

Footprint is 633 x 506 mm with a height of 840 mm before legs (add 90-125 mm); net weight is 49 kg. Electrically it needs single-phase 220-240 V 50 Hz, drawing 0.275 kW, within ±6%, on a 5 A breaker. Plan for 0.43 kW of heat into the space at 32 °C. Water consumption comes to 430 liters per 24 hours, or roughly 8 liters for every kilo of ice. Its refrigerant is R290 (propane, class A3), 110 g of it, which matters when you decide where the IM-65WPE-E-25 goes. Hoshizaki lists automated cleaning, UV-C sanitization and internal drain pump for the IM-65WPE-E-25.

On board

Keep the room around the IM-65WPE-E-25 between 1 and 40 °C and the incoming water between 5 and 35 °C at 0.7 to 8 bar. Water cooling keeps most of the heat out of the room, at the cost of about 430 liters a day from the tanks or watermaker. Hoshizaki matches the IM-65WPE-E-25 with the 4HC-H single filter system. Supply, water and fixing for the IM-65WPE-E-25 are confirmed per vessel when we quote, since the figures above describe Hoshizaki's standard build.

Key features of the IM-65WPE-E-25

  • EliteCUBE version with drain pump and UV-C sanitization
  • 54 kg of cubes per 24 hours
  • 26 kg built-in storage bin
  • Water-cooled condenser
  • R290 refrigerant
  • Exterior: Stainless steel AISI 441, Galvanized steel (Rear)
  • Automated cleaning, UV-C sanitization + Internal drain pump
  • Accessories included: Ice chute, Installation kit, Scoop

IM-65WPE-E-25 technical specifications

ManufacturerHoshizaki
ModelIM-65WPE-E-25
Product typeCube Ice Maker
SeriesIM EliteCUBE
ConfigurationSelf-Contained
Manufacturer item numberM113-D314
Country of originUK
Accessories includedIce chute, Installation kit, Scoop
Compatible water filters4HC-H Single Water Filter, 4HC Replacement Cartridge
Width633 mm
Width (packed)735 mm
Depth506 mm
Depth (packed)570 mm
Height840 mm
Height (packed)1012 mm
Volume (packed)0.424 m³
Legsfor legs add 90-125 mm
Electrical consumption0.275 kW
Ambient temperature (maximum)40 °C
Ambient temperature (minimum)1 °C
Voltage tolerance±6%
Water supply pressure (maximum)0.8MPa (8 bar)
Water supply pressure (minimum)0.07MPa (0.7 bar)
Water supply temperature (maximum)35 °C
Water supply temperature (minimum)5 °C
FunctionsAutomated cleaning, UV-C sanitization + Internal drain pump
Electrical circuit breaker protection5 A
ExteriorStainless steel AISI 441, Galvanized steel (Rear)
Gross weight59 kg
Net weight49 kg
Heat rejection (AT 32 °C, WT 21 °C)0.43 kW
Power supply1/220 - 240V/50Hz
Storage bin capacity26 kg
Cooling systemWater Cooled
Ice typeSmall cubes - 25
Ice production (kg/24h)54 kg
Water consumption incl. condenser (m³/24h)0.43 m³
CO2 equivalent0.33 kg
GWP3 GWP
Refrigerant charge110 g
Refrigerant typeR290
NoteThis type of icemaker is on special order only. Please take longer lead times into consideration.

Also listed under

Questions about the IM-65WPE-E-25

How much ice does the IM-65WPE-E-25 make per day?

Up to 54 kg of cubes in 24 hours, about 2.2 kg an hour. Real output drops as room and water temperatures rise.

How is the IM-65WPE-E-25 cooled?

It is water-cooled. The air-cooled version is the IM-65PE-E-25.

What water supply does the IM-65WPE-E-25 need?

Water at 5 to 35 °C and 0.7 to 8 bar, with the 4HC-H single filter system.

Where the IM-65WPE-E-25 is used

Marine Galley Equipment Ship Galley Equipment Yacht Galley Equipment Commercial Vessel Galley Equipment Offshore Galley Equipment

Hoshizaki, manufacturer of the IM-65WPE-E-25

Hoshizaki: Japanese maker of commercial ice machines, supplied through Hoshizaki Europe with cube, crescent, flake, nugget, cylinder and ball ice makers, ice and water dispensers and sushi display cases. Configured to order — tell us the vessel and the supply voltage and frequency, and we will quote the correct build.

All Hoshizaki equipment

Manuals and documents for the IM-65WPE-E-25

Documents are published by the manufacturer for the standard model. We confirm the build, supply and installation details for your vessel with the quotation.

Similar Cube Ice Makers

Get pricing for the Hoshizaki Cube Ice Maker IM-65WPE-E-25 – Self-Contained, Water-cooled, 54 kg/24h, S Cube

Add it to your quote basket with anything else you need, or request a quotation for this item alone.

Request a Quote